Heres my excuse for a T1 to T2 adapter

[WickedShelby88]

Alright here are some pics. Let me know if the links don't work. I've been working on this a little bit at a time at work. We're kinda busy right now so I haven't been able to finish it. let me know what ya think. Amazing what you can do with a scrap hunk of T6 aluminum. :)

http://i293.photobucket.com/albums/mm51/JBSHELBYS/th_100_2573.jpg (http://i293.photobucket.com/albums/mm51/JBSHELBYS/100_2573.jpg)
http://i293.photobucket.com/albums/mm51/JBSHELBYS/th_100_2572.jpg (http://i293.photobucket.com/albums/mm51/JBSHELBYS/100_2572.jpg)
http://i293.photobucket.com/albums/mm51/JBSHELBYS/th_100_2569.jpg (http://i293.photobucket.com/albums/mm51/JBSHELBYS/100_2569.jpg)
http://i293.photobucket.com/albums/mm51/JBSHELBYS/th_100_2567.jpg (http://i293.photobucket.com/albums/mm51/JBSHELBYS/100_2567.jpg)

[Anonymous_User]

http://i293.photobucket.com/albums/mm51/JBSHELBYS/100_2567.jpg

IMHO, this may create a slight flow restriction. :D :D

Looks good so far. Damn, I miss having access to the lathe/mill.

BTW, I finally realized what you were talking about on the Tie Rod Adjusting Sleeve :o . Before I buy one, let me know if you can make one cheaper!!

[WickedShelby88]

I can make one for free... Hows that for cheap! I just need measurements of one that is straight. All I would need is the length and the thread pitch. I can slot them on the mill accordingly just like the factory unit and this one will probably be much stronger.

Thanks, Joseph

[GLHNSLHT2]

is your time worth that little? Yes it's cool to be able to make stuff but bolting on a T2 compressor is easier and flows better anyway. But as far as your machining, so far so good.

[WickedShelby88]

Not really worth that little I owe the guy a favor. New pics up soon.

[GLHNSLHT2]

ahh I C, all good then.

[WickedShelby88]

Things didn't go as planned so I'm not going to throw any pics up till its installed or close to it. I will say my bore looks machined more cleanly than the turbo housing on the T1 garret.

[crazymadbastard]

I think you need to open it up a bit more for flow. :p
Must be nice to have acces to a machine shop.

[WickedShelby88]

Heres some pics of as far as I will get. I ended up having to use a spare T2 from the guy I got the car from. I will keep this around though just in case.

http://i293.photobucket.com/albums/mm51/JBSHELBYS/100_2626.jpg
http://i293.photobucket.com/albums/mm51/JBSHELBYS/100_2627.jpg
http://i293.photobucket.com/albums/mm51/JBSHELBYS/100_2628.jpg