'89 shelby engine harness in '85 omni??

[UPSIDE-DOWN-FACE]

ok, i know theres a lot of SMEC conversion questions going around. but none with a '89 shelby daytona harness and computer into a '85 omni. if some one can please help me out with the appropiate info and diagrams that i will need i would appreciate it.

thanks
kyle

[Mario]

Get an 85' Electrical Diagrams FSM and an 89' Electrical Diagrams FSM and you'll be good to go. Or just find someone with a scan of both bulk head pinouts and that will work too.

[bobr19]

What is the Omni--Carb or Turbo ??? The SMEC is self contained under the hood-If you have a carb, you can cut and splice at the bulkhead connector pretty easy--If 85 turbo you are dealing with the kick panel computer as well as the underhood and would be easier to use 89 under hood and under dash harness complete--bobr19

[UPSIDE-DOWN-FACE]

its a 85 glh. i have a 89 smec and harness. what can be done?

[Mario]

You take an L-Body bulkhead, you cut the bulkhead off of the 89' Harness and you splice the 89's wire into the L Bulkhead.

[deuce dodge]

you should never mess with wiring.......fire can come out of it.:)

do the old trick of removing all items you wont need and then you have a smaller mess to deal with.........

like a/c and radio wires etc....and always mark the wires when you remove them ....you did this right ????

deuce

[UPSIDE-DOWN-FACE]

yeah. all i need is the diagrams so i can splice the '89 bulkhead to the '85 bulk head. and you going to help eef.

[Phreakish]

same here, I'm doing similar, only its an '88 daytona turboZ harness into my '85 charger...

[Subliminal]

not too much difference between 88 and 89 harness...maybe headlights.

Here';s the 85 bulkhead (e body...probably pretty much the same:

http://www.turbo-mopar.com/forums/attachment.php?attachmentid=72&d=1135874095

and the 89 (turbo minivan...pretty much the same...could get you going):

http://www.turbo-mopar.com/forums/attachment.php?attachmentid=73&d=1135874095

d