PDA

View Full Version : 2008 Project?



turbogui
03-16-2008, 10:09 AM
Hi,

What are your 2008 project with your hybrid?

Here my:

- Put the New PTE SC-6152 turbo On!
- Refresh tranny clutch before season.
- Try the new SLICK!!! 24.8 X 8 X 13 with light wheel.

My car is a Omni 2.2 16V neon head, A-413 RMVB, Full Megasquirt and alcool injection. Last year i was running drag radial but that was to much for the tire. 16-17 psi give me 118 mph track speed low 13 with the old turbo ( 57 trim ebay T3T4). I hope to hit 11.99 whit this setup. At 20 psi this turbo is supossed to give me 400 whp....god!!!


Ciao

Russ Jerome
03-16-2008, 05:18 PM
My car is a Omni 2.2 16V neon head, A-413 RMVB. Last year i was running drag radial but that was to much for the tire. 16-17 psi give me 118 mph track speed low 13 with the old turbo ( 57 trim ebay T3T4). I hope to hit 11.99 whit this setup.

With your 118mph trap your pretty close to 11.99 now without
the tire smoke. I've had a similar hybrid setup (2.2/413/DRs/L-body/
60eT3/4.63)) run 12.0-12.3 at 115-120mph on DRs (midtrack spin).

shelbyplaya
03-17-2008, 10:18 AM
Mine is posted in the forum some where...

The short of it all is:
Hybrid 2.5l
forged wiseco's
stock 16v DOHC head
BIG exhaust manifold
57 trim T3/T4 w/ stage 2 turbine
walbro fuel pump
Full megasquirt V3pcb/V2 programe
+40's
Large NPR IC
Godspeed rad
A523 trans
TU 6puck w/ yellow PP
LOTS of inportant gauges
and...
24x8x15 MT slicks

All this going in a gutted 89 daytona Shelby

overlordsshadow
03-17-2008, 12:30 PM
Build the Shadow a near stock 2.2 as the base engine.

Then it's:
Fabricate a new intake manifold
Get head work finished (bigger valves, deshroud)
Fabricate downpipe for new turbo
#4 coolant mod
build 2.5 bottom end
New front bumper for the Shadow, thinking fiberglass oneoff
Possibly bigger brakes
Zeiner diode and more injectors
Fix the lebaron engine before winter (may require refresh)