ShelGame
02-28-2008, 11:07 AM
Here's the sketch I made when I had a weight box built for my Daytona race car ~2 years ago. Originally, I was going to use this as a fuel tank (I calculated the volume at ~2gal), but NHRA wouldn't let me re-locate the tank to the front for stock class. So, I made it a weight box instead. It fits on the RF side, above where the carbon canister is mounted (you have to remove the CC to fit this in). It fits just under the rad support. The 3 mounting points go to the fender support, the rad support and the frame rail/bumper support. I'll try to post some pics of it installed in my car. As a weight box, it cost about $150 to have it fabricated.