TPS harness repair

[bill2]

I was just curious where the tps wiring is usually faulty. Is it the wiring at the connector/pins or further into the harness?

[rich tideswell]

http://www.srtforums.com/forums/f75/tps-bad-idle-high-idle-p0123-code-we-may-have-diy-fix-72175/

[bill2]

Thanks Rich. I've seen that writeup before. I guess i'll replace the harness from the connector to the pcm pins. Nivo makes it sound like its right at the connector were it breaks, then shows a picture were the break is an inch or two from the connector, then another member has it replaced to were the tps harness branches off of the main harness :(.