View Full Version : Turbos/Intercoolers: WTB GLHS Intercooler Brackets
CDNTurboZ
02-11-2008, 02:42 PM
If anyone has a set let me know
thanks
CDNTurboZ
02-15-2008, 01:44 PM
:bump2:
CDNTurboZ
02-24-2008, 02:02 PM
:bump2:
minigts
02-24-2008, 03:00 PM
There should be SOMEONE on here who has a set. I was thinking it would be hard to find a set as most wouldn't part the brackets with the IC, but statistically there should be someone! Hopefully you'll find a set. BTW, what happened to the ones for yours or are you doing something totally different?
CDNTurboZ
02-25-2008, 02:42 PM
There should be SOMEONE on here who has a set. I was thinking it would be hard to find a set as most wouldn't part the brackets with the IC, but statistically there should be someone! Hopefully you'll find a set. BTW, what happened to the ones for yours or are you doing something totally different?
Basically I've been piecing a glhs rad/intercooler setup together. Found someone who only had a glhs rad, and found someone else who just had the intercooler. Now I just need the brackets
CDNTurboZ
02-25-2008, 02:42 PM
I am also willing to purchase another rad with brackets, etc if no one wants to part with just the brackets.
CDNTurboZ
03-06-2008, 03:16 PM
:bump2:
WLKivett
03-09-2008, 04:18 PM
I have just a GLHS fan, fan motor and shroud assembly if you need one?
Best Regards,
Landon Kivett
CDNTurboZ
04-09-2008, 07:13 PM
:bump2:
CDNTurboZ
04-13-2008, 01:34 PM
:bump2:
mock_glh
04-28-2008, 12:04 AM
Daytona/LeBaron brackets will work. You just have to cut off the front edge of the wide part and make a small strip where the hold down clamp goes. This is how the original ones are done.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.