"Top Fuel" Bender
01-31-2008, 06:53 PM
All T3 stuff though some of it is universal
If there's something someone wants make me a reaslistic offer and we'll go from there
If not I'll post the link this weekend for e-bay
lmk thanks
NEW :
dunn casting 16v lotus head
all mopar valves,springs,retainers,locks and seals
mopar cam seals , cam "freeze out plugs"
mopar/dayco stamped timing belt
apr head studs, washers, nuts
apr main studs , washers , nuts
mopar head gasket
mopar exhaust manifold gasket SOLD
intake gasket SOLD
2 goofy gaskets one part # 4504570ac half round on the top with lots of wierd holes
second is rectangular with 4 holes in the corner, and 2 intersecting round ones in the center that look like butt checks
2 mopar valve cover seals SOLD
mopar rod bearings pending
mopar main bearings
mopar 3 1/8" pipe plugs, 5 steel coolant head plugs
(4) nos connecting rods
Used:
'92 R/T sbec ecm SOLD
'92 spirit R/T wiring harness
T3 block,
forged crank,
cams, XJ and XL scribed on the end, not sure which is which, one cam has one lube with a defect in the casting
used rods and pistons all rods look good , one pistons has small marks on edge (maybe from a spark plug tip on something)
oil pump, intermediate shaft ( shaft sold
timing belt tensioner, 2 serp. belt idlers, 1 cam pulley, crank t-belt pulleySOLDcrank pulley
both valve covers front one has a 1/8"npt hole in the front (could have it welded shut if need be)
t-belt covers sold
16v dohc air box cover with broken tab
fuel rail, injectors, hoses
intake
throttle body
water pump, homemade deflector
coil
i/c tubes
If there's something someone wants make me a reaslistic offer and we'll go from there
If not I'll post the link this weekend for e-bay
lmk thanks
NEW :
dunn casting 16v lotus head
all mopar valves,springs,retainers,locks and seals
mopar cam seals , cam "freeze out plugs"
mopar/dayco stamped timing belt
apr head studs, washers, nuts
apr main studs , washers , nuts
mopar head gasket
mopar exhaust manifold gasket SOLD
intake gasket SOLD
2 goofy gaskets one part # 4504570ac half round on the top with lots of wierd holes
second is rectangular with 4 holes in the corner, and 2 intersecting round ones in the center that look like butt checks
2 mopar valve cover seals SOLD
mopar rod bearings pending
mopar main bearings
mopar 3 1/8" pipe plugs, 5 steel coolant head plugs
(4) nos connecting rods
Used:
'92 R/T sbec ecm SOLD
'92 spirit R/T wiring harness
T3 block,
forged crank,
cams, XJ and XL scribed on the end, not sure which is which, one cam has one lube with a defect in the casting
used rods and pistons all rods look good , one pistons has small marks on edge (maybe from a spark plug tip on something)
oil pump, intermediate shaft ( shaft sold
timing belt tensioner, 2 serp. belt idlers, 1 cam pulley, crank t-belt pulleySOLDcrank pulley
both valve covers front one has a 1/8"npt hole in the front (could have it welded shut if need be)
t-belt covers sold
16v dohc air box cover with broken tab
fuel rail, injectors, hoses
intake
throttle body
water pump, homemade deflector
coil
i/c tubes