View Full Version : Electronics: 90 turbo wiring harness
in need of a complete engine harness (including the sub harnesses for sensors) for a 90 daytona or lebaron turbo.
shelbyplaya
12-27-2007, 06:44 PM
i've got a compleat T4 (VNT) harness w/ SBEC for sale.
does it have all the same wire colors as the t1
shelbyplaya
12-27-2007, 11:26 PM
does it have all the same wire colors as the t1
as far as i know they are the same harness, one computer uses the extria features (VNT solinoids/air charge sensor) and the other dosent i believe.
85shelbycharger
12-28-2007, 01:31 AM
I've got a harness from a '90 Turbo Caravan...don't know if that would work for you or not.
you also have a 90 t1 daytona. if it the caravan matches the wires on you daytona it will work
http://www.oldschoolhotrodder.com/modules.php?name=Downloads
follow that link and the 90 al and aj body diagrams will show you the 90 daytona
diagram tHAT I need. i dont know if the van is the same.
Turbodave
01-08-2008, 05:21 PM
I have two harnesses from a 90 Lebaron.
The front harness with the Negative Battery cable, alternator wiring, hall effect, fan, temp sensor wiring etc..
And the trans/starter harness with the Positive battery cable and the wiring for an automatice trans.
Both are in good shape from a wrecked 98k mile Lebaron. Let me know if you are interested in either.
Rampage16V
01-10-2008, 10:56 AM
I have a 91 turbo Shadow harness
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.