PDA

View Full Version : 2.4 bottom end ?



spoolinhard
11-29-2007, 12:27 PM
I have a 99 2.4, do I just put turbo rods pistons and bearing in it? Is there anything special I have to do with extra oil passage?

Turbodave
11-30-2007, 04:17 PM
You'll need an oil return from the turbo, most guys run this into the oil pan instead of the block, however.

I think there is an oil galley you can tap into for the feed to the turbo so that's pretty much it that I can think of.

spoolinhard
12-02-2007, 11:39 PM
You'll need an oil return from the turbo, most guys run this into the oil pan instead of the block, however.

I think there is an oil galley you can tap into for the feed to the turbo so that's pretty much it that I can think of.

Yeah, I as aware of the oil return into the oil pan, I guess that I should have posted that. Just making sure that there wasnt anything special that I had to do.
thanks
-
kaleb

BadAssPerformance
12-03-2007, 02:44 AM
If you haven't seen it the KC 2.4L info is helpful:

http://www.turbo-mopar.com/forums/vbarticles.php?do=article&articleid=47

spoolinhard
12-03-2007, 02:42 PM
thanks