PDA

View Full Version : valve springs


1FastCSX289
11-27-2007, 12:12 PM
Do you offer a high rpm capable valve spring?
Chris W
11-27-2007, 02:13 PM
Currently, just what's available through Mopar Performace. It would be best to contact us directly.

Thanks!

Chris-TU
Aries_Turbo
11-29-2007, 12:30 PM
Chris, any chance you could stock Comp PN 942 springs? they are a single valve spring that is a drop in with our retainers that specs out at 115lbs @ 1.700 installed height / 284lbs @ 1.200.

Brian
Chris W
11-29-2007, 03:50 PM
Chris, any chance you could stock Comp PN 942 springs? they are a single valve spring that is a drop in with our retainers that specs out at 115lbs @ 1.700 installed height / 284lbs @ 1.200.

Brian

Shouldn't be a problem. My supplier is looking into it.

Chris-TU
Aries_Turbo
11-29-2007, 06:59 PM
cool, there is a dual spring too PN 985, 164lbs @ 1.750 / 331lbs @ 1.250 but you have to run 10 deg titanium retainers and 426 Hemi keepers. I dont know if you have to machine the head though. FYI TurboJerry supplied this info originally. I was just trying to get it into our marketplace. :)

Thanks Chris

Brian
Chris W
11-30-2007, 04:46 PM
Set of 8 PN 942 $32.
Set of 8 PN 985 $44.

Call to order until they are added to our site.

These are in stock

Chris-TU
1FastCSX289
11-30-2007, 06:51 PM
Trying not to be a PITA, but.....How about Comp #926-16? Can you get these as well? How much?

Thanks.
Aries_Turbo
11-30-2007, 08:38 PM
looks like that would be good as well as long as the size is ok which it is really close to the other ones that are ok so I think its fine. that one is at 150 seat load (calculated) and ~290 at .43" lift.

someone who uses these springs will need to verify that it is an ok spring to drop in there dimensions wise.

Brian

Brian