PDA

View Full Version : Proportioning valve



Boogieman142
02-15-2006, 03:25 AM
Ok, has anyone screwed around with their proportioning valve, i wanted to increase the pressure to the rears just a little bit.

Wink
02-15-2006, 09:20 AM
replace the inserts of the valve. Or just grab another unit from a different car.

Boogieman142
02-15-2006, 11:46 PM
Well, i wanted to increase the pressure to the rears a little so how will replacing the inserts of the valve do it, i was thinking about maybee getting one for a rear disc car and using that.

rbryant
02-16-2006, 01:26 PM
If you can measure the spring pressures you can also look into changing them with a slighly stronger spring from somewhere lime mcmaster car. The big spring effects the crack point.