Turbodave
11-05-2007, 11:56 AM
Have a bunch of extra suspension and brake parts, will ship smaller items, prefer local pickup on the bigger stuff. All prices are without shipping.
L-body:
GLH/Shelby Charger rear axle, with brakes (brakes will need to be re-done.) This axle is slightly wider than the ones on a base Omni/Charger and has the factory sway bar welded to it that the non-performance L-body's didn't receive. Have a few of these - $50 each.
Stock GLH springs - set of four (paint chipping off them but otherwise fine). $50.
K-frame with control arms (has bracket for manual trans (525)). $75
Control arms $35ea.
Front Knuckles - Include caliper brackets and calipers. $40 ea.
K-Frame by itself - $50.
Stock GLH sway bar - $25
G-body
88 K-frame and control arms - $75 (from a Manual trans car)
K-frame by itself -$50
Control arms - $35ea
88 Shelby Z- swaybar, worn down around the mounting points to k=frame - $25
Knuckles with brakes - $40 ea. (stock 88 shelby-z brakes).
Rear axle assembly with non-vented disc brakes - $100 (has the big shelby-z sway bar in it).
Rear disc brakes by themselves - $100
Rear axle by itself - $50
Others
I also have a bunch of other suspension parts of various turbo mopars, in particular rear axle assemblys and K-frames/ Control arms, if there is a particular one your looking for let me know.
L-body:
GLH/Shelby Charger rear axle, with brakes (brakes will need to be re-done.) This axle is slightly wider than the ones on a base Omni/Charger and has the factory sway bar welded to it that the non-performance L-body's didn't receive. Have a few of these - $50 each.
Stock GLH springs - set of four (paint chipping off them but otherwise fine). $50.
K-frame with control arms (has bracket for manual trans (525)). $75
Control arms $35ea.
Front Knuckles - Include caliper brackets and calipers. $40 ea.
K-Frame by itself - $50.
Stock GLH sway bar - $25
G-body
88 K-frame and control arms - $75 (from a Manual trans car)
K-frame by itself -$50
Control arms - $35ea
88 Shelby Z- swaybar, worn down around the mounting points to k=frame - $25
Knuckles with brakes - $40 ea. (stock 88 shelby-z brakes).
Rear axle assembly with non-vented disc brakes - $100 (has the big shelby-z sway bar in it).
Rear disc brakes by themselves - $100
Rear axle by itself - $50
Others
I also have a bunch of other suspension parts of various turbo mopars, in particular rear axle assemblys and K-frames/ Control arms, if there is a particular one your looking for let me know.