PDA

View Full Version : Custom Large Plenum 8V Intake Manifold FS


Dave
10-24-2007, 06:37 PM
I have a custom built intake manifold that was built by Aaron Miller (8Valves). It was never used. It has a "D" shaped 4 litre plenum with two hand crafted veloctiy tulips. I also drilled and tapped two 1/8"NPT threads for supplemental injection over each tulip. It already has an IAT sensor port drilled and tapped (I'll even through in the IAT sensor). It also has 3 (unsure of the thread) threads in the end of the plenum for vacuum supplies. The runners are mainly stocked but ported slightly in the upper regions.

It has been sand blasted and painted silver. This would surely help any 8 valve meet some outstanding goals.

Asking $300 shipped.

Thanks!
-Bryan
cordes
10-24-2007, 06:41 PM
Will it fit an L body?
Mario
10-24-2007, 06:56 PM
Bolt on for a 2 Piece or a 1 Piece Deal? Pictures?
Dave
10-24-2007, 07:16 PM
Will it fit an L body?

Yes.


Bolt on for a 2 Piece or a 1 Piece Deal? Pictures?

I don't quite understand what you're asking. It was welded to a 1piece plenum originally. I'll get pictures soon.
mcsvt
10-24-2007, 07:18 PM
1 piece with box/plenum if it's the same one Aaron showed in his intake thread that Brian bought.
turbovanmanČ
10-24-2007, 07:24 PM
I don't quite understand what you're asking. It was welded to a 1piece plenum originally. I'll get pictures soon.


He asked if its a 2 piece intake with the upper plenum modified or a modified one piece intake, ;)

BTW, change your sig to "traitor" :eyebrows: :clap:
Vigo
10-24-2007, 07:28 PM
lol!!

who did you sell your van to again? ive gotta go follow their threads from now on... ^ :p
turbovanmanČ
10-24-2007, 08:12 PM
lol!!

who did you sell your van to again? ive gotta go follow their threads from now on... ^ :p

His dad took it back and he now has a Golf VR6, :yuck: :lol:
8valves
10-25-2007, 04:37 PM
Just for reference, it should be about 3.5L total displacement.
GLHNSLHT2
10-26-2007, 12:48 AM
does that 3.5 liters include the runners as well? Cause doing the math I don't see how you can make the plenum long enough to get 3.5 liters out of it and still have room for the PS pump and to get a hose onto the TB.
8valves
10-26-2007, 01:56 AM
does that 3.5 liters include the runners as well? Cause doing the math I don't see how you can make the plenum long enough to get 3.5 liters out of it and still have room for the PS pump and to get a hose onto the TB.

No, no runners.

Internal volume should calculate out to right around 3.0X liters. I'm not sure how to take the velocity stacks into consideration to be honest.

I apologize for not being specific enough. I was just running quickly and used OD measurements without thinking twice. My mistake.

Regardless of which, it's plenty for a very healthy 8V car, drag or street.
Dave
10-26-2007, 09:11 AM
Thanks for the info Aaron. Like he said it's a very good unit to make any serious numbers out of an 8V.

Here's his post on it- http://www.turbo-mopar.com/forums/showthread.php?t=15441&highlight=plenum

Please PM me or post here. I am willing to negotiate. I would like to sell it soon. Thanks!

-Bryan

PS: Yes the van is sold to my dad, it's at Rob Pachner's house now. I wiped out the front clutchs, the pinion gears, and the torque converter. He's rebuilding the trans and getting a new TC, then driving it through the winter.

I wrecked my Golf into a curb. Apparently Nitto's don't work too well in the rain. ;) I just need a new rim. So now it sits.
Dave
10-30-2007, 01:16 PM
$250 Obo
BIGBRUDDA
10-30-2007, 01:23 PM
He asked if its a 2 piece intake with the upper plenum modified or a modified one piece intake, ;)

BTW, change your sig to "traitor" :eyebrows: :clap:

YAH!! Der Kubblevagon crasher!! Ist curb crrrashinc der "Fahrvernugen"?
Dave
11-01-2007, 08:13 AM
No one has a need for a sweet intake? ;) I am accepting offers.
Dave
11-07-2007, 02:11 PM
Sale pending...
GLHNSLHT2
11-07-2007, 09:48 PM
Dave can you reply to my PM I sent a while ago? thanks
airagitated
11-08-2007, 05:17 PM
If it's not sold already we'll take it for $250 shipped. Pm me for phone # and info.
Thanks,
Mike
Dave
11-17-2007, 06:07 PM
Intake is sold. Thanks for everyone's interest.
8valves
11-18-2007, 07:04 PM
Please have the new owner keep me up to date on how it worked out for them. Thanks.
Dave
11-19-2007, 09:19 PM
No problem, Aaron. I hear my dad (BIG PSI) is having you build him one?
turbovanmanČ
11-19-2007, 10:34 PM
Who bought it????? :nod:
10G OMNI
11-20-2007, 12:51 AM
That would be me,i also bought rattlesnakes.Will let you guys know how it does.
Thanks for a smooth deal.
Peter(OSDAC) Thats Ontario Canada
turbovanmanČ
11-20-2007, 01:10 AM
That would be me,i also bought rattlesnakes.Will let you guys know how it does.
Thanks for a smooth deal.
Peter(OSDAC) Thats Ontario Canada

Are you going to do back to back tests, :clap:
8valves
11-20-2007, 10:20 AM
No problem, Aaron. I hear my dad (BIG PSI) is having you build him one?

Hopefully, as long as I get some time right away at the new job.