1987 Daytona Pacifica parts needed

[seanjnl1]

Hey all, I need some various trim parts for a 1987 Dodge Daytona Pacifica. Please let me know if you can help.

-a Pacifica rear nameplate emblem
-The carpeted rear plastic panel for the rear of the hatch (gray)
-The black plastic trim bezel around the interior of the driver's door handle
-3 shiny finish Pacifica rims
-driver's door glass
-driver's door power mirror assembly

I do have pictures of most of these items if you are not sure of what I am talking about. Please e-mail me if you can help: gammcc@att.net

Thanks a bunch
Greg

[karlak]

rims the same for 88 model ?

[88_pacifica]

They're called "eggshell series" rims and came on cars other than just the Pacifica as well...

Only you're emblem nameplate is Pacifica specific, the rest can be found from just about any model.

[jaysshelby]

I have the Pacifica nameplate just needs the red applied.

[seanjnl1]

rims the same for 88 model ?

Yes, I believe the 1987 and 1988 eggshell rims were the same. Do you have some that you would like to unload?

[88_pacifica]

Yes, I believe the 1987 and 1988 eggshell rims were the same. Do you have some that you would like to unload?

nope... just trying to help you out with what they were called and let everybody here also know that what you need is "universal" with the exception of the rims and nameplate.. ;):thumb:

[turbodaytona87]

Damn I just junked a pacifica yesterday

[seanjnl1]

Hey all. Thanks for the great response. I was able to get a bunch of the parts that I need. Unfortunately, I also managed to find some more parts that I need. I guess that it the way it goes. Here is an updated wish list

-driver's side door glass (T-top car).

-underhood light socket and wire. Picture shows the wire that goes to the socket.
http://www.moparautos.com/11102007%20004.jpg

-driver's side fender. I live in Michigan, so I will need one within driving distance to pick up, since mailing it will probably cost a fortune. Please, it must be rust free and dent free. Color is not important.
http://www.moparautos.com/11102007%20001.jpg

-Plastic cover for driver's side T-Top. Color is gray. This is the part that covers the latch mechanism on the T-Top.
http://www.moparautos.com/11102007%20003.jpg

-Plastic fastener. This is the fastener that holds the black plastic panel covering the rear taillight sockets.
http://www.moparautos.com/11102007.jpg

If any of you can help, please let me know. I have purchased items from other people in this forum, so they know that I won't give you the runaround.

Thanks a bunch for your help
Greg

[austinpowers]

hey i am parting a 87 pacifica, i have some of the fastners for the tailite cover and a set of wheels, give me a email, i will send some pics, hferg2@gmail.com