View Full Version : SRT-4 Pistons...
Frank
10-16-2007, 08:55 PM
Are the "SRT-4" Pistons you list in the store compatable for the 2.4L motors we like to turbo charge for our cars? If so, can they be had in 9.0-9.4 compression ratio?
Chris W
10-16-2007, 09:12 PM
Are the "SRT-4" Pistons you list in the store compatable for the 2.4L motors we like to turbo charge for our cars? If so, can they be had in 9.0-9.4 compression ratio?
YES!! :thumb: Custom compression ratios will take 4-6 weeks to have made though.
Chris-TU
contraption22
10-16-2007, 09:53 PM
Are these pistons like conventional dished turbo appliaction pistons, or are they domed like the OEM SRT-4 pistons?
Chris W
10-16-2007, 10:27 PM
Are these pistons like conventional dished turbo appliaction pistons, or are they domed like the OEM SRT-4 pistons?
SRT-4 pistons are per factory specs but forged. Custom versions as mentioned above are any way you want them.
Chris-TU
Frank
10-17-2007, 06:37 AM
So the picture is not representative of the actual shape?
Chris W
10-17-2007, 09:16 PM
So the picture is not representative of the actual shape?
Actually, when we put that photo up we didn't carry them in stock so we used a 2.2/2.5 photo. Now that we have a few sets on our shelf I can update the photos.
Chris-TU
Frank
10-17-2007, 10:46 PM
Cool. Well I have somethings to take care of first, but I have a huge list here soon. ;)
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.