window scraper equivelant

[mightyss]

ok, guys and gals, i have just completed replacing my scrapers on my rampage. not with originals(who could find em any way), but jcwhitneys. they seem to fit very close to originals, and are fairly cheap.part # is 819751, they are 4 foot long, so 1 for each window. they are called flocked rubber weatherstrip, and are $16 a pc. fairly straightforward, only mod is 1 or 2 cuts made to match the rampages curved upward sweep by the rearveiw mirrors. the doorglass is TIGHT now and doesnt rattle when door is shut w/window down!!!!!! this seems to me to be the answer to our l-body door problems. it takes about 1/2 to an hour each door..........any questions feel free to shoot em.................steve


p.s. one HUGE tip, when unbolting the glass(so you can drop it to the bottom of the door to access the scraper screws) first mark the bolt washers w/a marker so when you bolt the glass back on, you dont have to spend an hour aligning the glass,,,,,DOH!!!!

[GLHSKEN]

Great find!!!

[minigts]

Can you post the link for those? I searched on that part number and no luck.

Thanks for the info and good find!

[DC Turismo]

Anything close for 2-dr. Pbody owners?! lol...

[mightyss]

ok, part# is ZX819751A.....DC, there are 3 types of these flocked rubber moldings, i picked the "tallest" sidewall and it is still about 1/4" shorter than the original, and not as heavy duty, but still seems to work. if the p-bodies are like the L's, you should find one that works too.

[minigts]

Well I think if the window is pressed decently to the seal it will work fine. My problem is my INNER window seals wore out, but with this I may be able to replace mine with these as I have a brand new set of the factory exterior window scrapers. :D

http://www.jcwhitney.com/autoparts/Search?catalogId=10101&storeId=10101&sku=ZX819751A&searchbtn.x=22&searchbtn.y=16

That's the link for the part number.

Thanks again!

[87glhs232]

ok, guys and gals, i have just completed replacing my scrapers on my rampage. not with originals(who could find em any way), but jcwhitneys. they seem to fit very close to originals, and are fairly cheap.part # is 819751, they are 4 foot long, so 1 for each window. they are called flocked rubber weatherstrip, and are $16 a pc. fairly straightforward, only mod is 1 or 2 cuts made to match the rampages curved upward sweep by the rearveiw mirrors. the doorglass is TIGHT now and doesnt rattle when door is shut w/window down!!!!!! this seems to me to be the answer to our l-body door problems. it takes about 1/2 to an hour each door..........any questions feel free to shoot em.................steve


p.s. one HUGE tip, when unbolting the glass(so you can drop it to the bottom of the door to access the scraper screws) first mark the bolt washers w/a marker so when you bolt the glass back on, you dont have to spend an hour aligning the glass,,,,,DOH!!!!

No pics? No write up for the Knowledge Center? Your FIRED!

Nah... really tho great job!

[54inches]

How are these holding up after 3 years?

[zin]

Curious as well...

Mike

[Nemesismachine]

Need to throw up a picture of em, too.

[54inches]

Bueller....

[135sohc]

Last active
04-10-2009

[54inches]

Alright, I need to replace mine now as I have the car torn apart, so I will order them and keep this thread alive. :)

[54inches]

I read the reviews @ JC Whitney and will write one, once I get these installed. Here are the vehicles that this specific product were used on(very interesting):

'76 EL CAMINO; sounded like alot of fab.
90 Cavalier; sounded like it fit well.
91 Sundance; used for inner and outer, outer did not work as good.
"Worked well on my Classic Plymouth and saved me money."

[zin]

All I'm waiting for is the go-no-go... I guess it's not that much $$, but I would still hate to throw it away on something that doesn't fit/work...

Mike

[turbodaytona87]

Is it this?

http://www.jcwhitney.com/inner-and-outer-belt-weatherstripping-universal/p2008570.jcwx?skuId=225817&filterid=j1

If so, the correct part number is "1JA 819751"

Let me know how the install goes, my passenger scraper is getting bad.

[54inches]

Yep and the other number from earlier in the thread works as well, they are the same part. I am hoping to order today, so I can get them in before the Rampage goes to the paint shop.

[turbodaytona87]

I know, but it wouldn't pull up for me without the first three characters.

[iangoround]

Yes that stuff will work. I have it on my T top daytona and it has been there for a year or so now.

See this thread:
http://www.turbo-mopar.com/forums/showthread.php?t=33106&highlight=scraper

[54inches]

That is awesome that it works for a Daytona as well; I am about to see if it will work for the L-bodies, specifically a Rampage of the '84 vintage.

[zin]

That is awesome that it works for a Daytona as well; I am about to see if it will work for the L-bodies, specifically a Rampage of the '84 vintage.

Any ideas on window channel?

Mike

[fishcleaner]

the window channel works good and the door seal is close, stiffer rubber so the door is harder to close, but it works. This is the JC outside window scrapper

http://www.crazy4carz.com/gallery2/d/60882-1/windowscraper1.jpg

[54inches]

Any ideas on window channel?

Mike

For the Rampage? Not sure what you are referring to. Mine has the outside scraper and the inside scraper attached to the door panel, with the latter being in decent shape.:D

[zin]

For the Rampage? Not sure what you are referring to. Mine has the outside scraper and the inside scraper attached to the door panel, with the latter being in decent shape.:D

I'm referring to the channel that the window rides in, inside the door frame...

Mine are pretty bad and so they let the windows rattle around, etc...

Mike

[54inches]

Again, Are you referring to a Rampage?

If so, Need pics.

[zin]

Again, Are you referring to a Rampage?

If so, Need pics.

Sorry, wasn't quite on the same page with you there...

I'm assuming that these would be the same as is used on the Omni and others, but, having not owned a 'page, I don't know if they are the same...

Mike

[supercrackerbox]

Omni-Potent sells window channels and scrapers for the 4-door L bodies now. And last I knew you could still get factory scrapers for the 2-doors. I have a shiny new pair stashed in the GLHS for whenever I get around to restoring it.

[135sohc]

Anybody wants to get in on the action there is a pair listed on ebay right now... Not mine of course.

[54inches]

Omni-Potent sells window channels and scrapers for the 4-door L bodies now. And last I knew you could still get factory scrapers for the 2-doors. I have a shiny new pair stashed in the GLHS for whenever I get around to restoring it.

Yes, but this thread is a less expensive option for those that cannot afford the NOS pieces.

Thanks!;)

[supercrackerbox]

I didn't think $65 each was too bad. :(

Carry on.

[54inches]

I didn't think $65 each was too bad. :(

Carry on.

Should I send you my address so you will know where to send my new window scrapers?

I am not made of money. :D:thumb:

[54inches]

Got the JC Whitney scrapers in today and have been mocking them up tonight.

Pics and write up to come.

[54inches]

See my build thread for update:

http://www.turbo-mopar.com/forums/showthread.php?t=44294&page=12

[54inches]

Any question?