Ryans big parts selloff

[J&H Ryan]

413 Trans: $50
IC rad: $50
87 Shelby II shortblock Engine (knocking): $50
Turbo (TII): $50 - good for core
Shelby Lancer Pass fender: $50
Shelby Lancer Grille (perfect): $100
Shelby Lancer Dash plaque: $100
87 TII LM: $90
2 Lebaron GTS tails:$20
1 Lancer tail: $10
Hbody carpeting and headliner, newer - $20
earlier steering column w key - $40, have two
J body 87-92 (92 non-gtc) full set of 3 taillights - $40
89 TII intake - $80 -
87 TII head - $50
Hbody dash surround: $10
earlier J/G dash surround: $10
pre 90 cooling fan: $5, have two
have several alts, send me a pic if you need one and ill match up - $10
Daytona tails - still red:amen: - $20
flywheels (at least 2) $5
Sandblasted TI 89+ intake (nice) $30
New but not OEM 87-92 Jbody grille, red
Liquid filled boost guage - has a dent in ring, used once (function not affected) The larger size, lol - $30
Stock never used foglights off some Chrysler, never used - $10
Stock DP back exhaust from a Jbody - free, you take off
Pass side un-equal length axle: $30
equal length: $50 (have two I think)
88 Shelby Z Daytona rear calipers: $50
Shelby Lancer big brake package - at least 1 rear caliper is shot. I tried to keep a couple pads and rotors so you can get replacements to match - $50
Shelby lancer front sway bar - $10
6.5" pioneer speakers - I dunno, they're blue... $30
Cadillac SRX foglights w/ running lights - not sure why I have these, but they are new. $20
Hbody dashboard - free
Clarion EQ - just the unit&wires: $5
Chrysler ABS pump and computer (new): $10 (don't ask me car(s) its for, I don't know)
Canon i860 for parts (hey, I didn't just say car parts...) $10
MTX RT2120 amp - $30

This is just what I can think of off the top of my head - I'll catalog it some day soon...:yuck:

Why so blue? Only the things I have in blue will I ship, unless you really really want to actually pay me for what its worth to box up and take to the post office.

Thanks for lookin!

boogtc25@yahoo.com since my PM box may fill.

And since its been awhile since I've sold much or you may not know me, I have references:

http://www.turbododge.com/forums/f7/f10/f38/37121-jandgbodys-great-seller.html
http://www.turbododge.com/forums/f7/f10/f38/27489-jandgbodys-great-seller.html
http://www.turbododge.com/forums/f7/f10/f38/82928-turboguycjv-jandhbodies.html
http://www.turbododge.com/forums/f7/f10/f38/75110-jandhbodies-aka-ryan-gannon.html
http://www.turbododge.com/forums/f7/f10/f38/93006-jandhbodies-great-seller.html
http://www.turbododge.com/forums/f7/f10/f38/82477-jandhbodies-great-seller.html

[88_pacifica]

bump for a GREAT DEAL on parts!! If I didn't already have everything I needed I would... ESPECIALLY a T2 core...

[Mario]

I'll take the SRX Fogs.

[turbovanman²]

You have a PM.

[kuzman83]

sent pm

[J&H Ryan]

84-89 Daytona, 87-89 Lebaron center console w/ manual shift boot: $20
Wiper motor: $5
J-body reverse lights: $5
87 H-body dash cluster: $25
H-body door reflectors: free
round-style Mopar coil: $5
"1" master brake cyl: $15
"7/8" master brake cyl: $15
Brake booster, nearly rust-free: $10
BC369JSTD (I believe 2.2) main bearings: $10
mid 80s DNR tape deck w/ eq, CHRYSLER: $10 (working cond. unknown)
Lighted vanity mirrors for ??? car (is Chrysler): $5
Lebaron convertible top struts: $20
Lebaron convertible top motor: $50
87-95 Lebaron convertible DS rear window assembly w/ motor: $50
H-body lower grille inserts (2): $5
Daytona hatch struts (2)(cant test now, worked when pulled): $10
Rearview mirror, clear lens: $5
Early style HVAC control, w/ A/C: $5

[Big_P]

The TII turbo is no good?

[J&H Ryan]

The TII turbo is no good?
Its not long before the compressor hits the housing.

For local pick ups, you can have the exhaust mani, SV, and o2 for that $50.

I took apart that engine, and found why it was "knocking". It had a damaged lifter. Because of this, the head is free (pick up). The VC was hit by the rocker and put a hole in the PCV setup. Free as well (great deal if you want to ditch that setup http://i5.photobucket.com/albums/y160/BooGTS/Parts/Oct14010.jpg
anyway).
Rods and pistons: $20
Block w/ crank, intermediate, pan, and pulleys: $20

http://i5.photobucket.com/albums/y160/BooGTS/Parts/Oct14004.jpg
http://i5.photobucket.com/albums/y160/BooGTS/Parts/Oct14003.jpg
http://i5.photobucket.com/albums/y160/BooGTS/Parts/Oct14002.jpg
http://i5.photobucket.com/albums/y160/BooGTS/Parts/Oct14007.jpg
http://i5.photobucket.com/albums/y160/BooGTS/Parts/Oct14008.jpg

Good 3 piece VC: $10
Good 1 piece VC: $50
http://i5.photobucket.com/albums/y160/BooGTS/Parts/Oct14006.jpg

Pic of the above mentioned daytona calipers:
http://i5.photobucket.com/albums/y160/BooGTS/Parts/Oct14016.jpg

Mopar boost guage: $30
http://i5.photobucket.com/albums/y160/BooGTS/Parts/Oct14030.jpg

[Mario]

LMK when I can get the fogs.

[J&H Ryan]

bump^

boost guage is sold

[ShelGame]

So, do I read this right - you want $40 for a complete 87 T2 w/head and it only had a bad lifter? Lemme see if I can borrow a truck this Sat...

[J&H Ryan]

So, do I read this right - you want $40 for a complete 87 T2 w/head and it only had a bad lifter? Lemme see if I can borrow a truck this Sat...

Yup, you read right.

edit: come and get her, I'll PM my phone #. Its in Wixom, so even better for you.

[roachjuice]

is the mopar boost gauge sold? if not i'll take it.

[turbokid]

will your rad /ic set up fit a chrysler lebaron 2.5 convert?

[J&H Ryan]

is the mopar boost gauge sold? if not i'll take it.
It is sold - I have no way to update that list because of editing times though.


will your rad /ic set up fit a chrysler lebaron 2.5 convert?
Its just the radiator/brackets - have to get an easy to find IC separately. It will bolt into any pre 90 car, or requires simple fab for any year newer than that.

[ShelGame]

I just saw the pics. I'll definitely come get the T2 shortblock + head for $40. I sent you a PM. Tues should work fine for me.

[J&H Ryan]

engine/head gone

[CNH320]

Can you get me a pic of the ABS pump/hyd unit?? I need one for my 92 R/T and want to see if its the right one.

Thanks!

Chris

[J&H Ryan]

Can you get me a pic of the ABS pump/hyd unit?? I need one for my 92 R/T and want to see if its the right one.

Thanks!

Chris
Its likely newer than a 92, as it is unused, but heres some pics anyway:
http://i5.photobucket.com/albums/y160/BooGTS/Parts/Carparts010.jpg
http://i5.photobucket.com/albums/y160/BooGTS/Parts/Carparts009.jpg

[J&H Ryan]

ttttt

[mimiglh22]

Turbo still available??

[J&H Ryan]

Turbo still available??
yes - really surprised at that too...

[TopDollar69]

Ryan, can you send me a pic of the TII radiator. I think I will take it, but would like to see a pic first. Email is topdollar69@hotmail.com.

Thanks,

Ben Huebner

[J&H Ryan]

Ryan, can you send me a pic of the TII radiator. I think I will take it, but would like to see a pic first. Email is topdollar69@hotmail.com.

Thanks,

Ben Huebner
I have someone whos sending me money on that right now. There is a pic posted in my TD.com parts thread of the rad.

[TopDollar69]

Let me know if it falls through, I have money I can send ASAP.

Thanks,

Ben Huebner

[J&H Ryan]

Radiator is sold.

[J&H Ryan]

Bump!

Holy cow, I've completely forgotten about that radiator. I need to get back on the ol' horse...

[J&H Ryan]

Back on the horse, bump!

[J&H Ryan]

Bump.

[J&H Ryan]

bump - next stop, el garbage

[moparman76_69]

amp and EQ work? pics?

[BadAssPerformance]

[COLOR="Navy"]Shelby Lancer Dash plaque

What number? pics? of it and the car?

[J&H Ryan]

What number? pics? of it and the car?
347 -Here it was :o http://www.turbo-mopar.com/forums/showthread.php?t=16707

[BadAssPerformance]

Oh, snap, I remember it now :(

Was there glue residue on any of the black dash trim where the dash plaque may have been before it was on the PS dash?

[J&H Ryan]

Oh, snap, I remember it now :(

Was there glue residue on any of the black dash trim where the dash plaque may have been before it was on the PS dash?
:confused2: SL's factory location is there. In any case, there was no glue, ect anywhere.

[BadAssPerformance]

I have seen the S-Lancers have them on the radio bezel piece and also on the overhead console if equiped.

[TopDollar69]

I've always seen them on the RH side of the dash.

[J&H Ryan]

Bump - ill have a set of SL wheels with tires f/s beginning of march...

[minigts]

Are the brakes just the rear or fronts as well or do you have fronts?

[lucky13]

turbo still avail? i

[cleven]

So what all you got left

[minigts]

Still interested in info on the brakes.

[J&H Ryan]

I need to update - the brakes are gone. My computers HD broke, so I'm not online often. Most everything is still available though - let me know what you are looking for.

[J&H Ryan]

turbo still avail? i
Yes :thumb:

[1983Rampage]

What SV is on it. I am needing a 2.5" atleast for my car. If it is that, how much for shipping to 66502. Thanks.

[J&H Ryan]

What SV is on it. I am needing a 2.5" atleast for my car. If it is that, how much for shipping to 66502. Thanks.
Its out of an 87 Shelby Lancer, making it a 2.25", sorry.

[1983Rampage]

Thanks anyways

[1 bad day]

still have the TII engine?

[WickedShelby88]

Do you still have the Hbody carper? What color is it and do you have an A413 detent cable at all?

Thanks, Joseph

[J&H Ryan]

still have the TII engine?
Sold



Do you still have the Hbody carper? What color is it and do you have an A413 detent cable at all?

Thanks, Joseph
I may have the carpet - it is black. I may have the cable as well - is the detent the selector or the kickdown?

[WickedShelby88]

The car I have is grey so I couldn't really use the carpet. The selector and kickdown cables both would be great, but what I really need is the kickdown as I already have a local line on a selector cable.

Thanks, Joseph