PDA

View Full Version : Spirit RT exhaust questions



TurbododgePirate
09-24-2007, 04:18 PM
Will a 3" Exhaust downpipe ( like the one turbos unleashed is selling ) bolt up to the T3 turbo. I have heard yes, but just want to confirm one more time.

Also, I have heard that a G body (Daytona) exhaust is the same as a Spirit exhaust, and that they are interchangeable. Is that accurate?

Thanks!!

~~Heath

turbovanmanČ
09-24-2007, 04:51 PM
Yes, for the 10th time, the 3 inch DP will bolt right up, ;)

Not sure on the exhaust, will have to look at my book later.

Turbodave
09-24-2007, 05:20 PM
Spirit and Daytona are different after the rear axle, you could probably make it work but the tailpipe is angled different.

TurbododgePirate
09-24-2007, 07:02 PM
Yes, for the 10th time, the 3 inch DP will bolt right up, ;)

Not sure on the exhaust, will have to look at my book later.

Thanks Simon.

But hey, if it's only the 10th time from your 10,500 posts, thats like what, 1% of the posts you make? :)

turbovanmanČ
09-24-2007, 08:04 PM
True, true, :clap:

My Walker book shows the rear part over the axle as looking the same on 88ish G bodies but different part number. They do make a Spirit exhaust ya know, :confused: :nod:

Scottmon
09-25-2007, 08:43 AM
Yeah, the Daytona exhaust/muffler comes straight back after the axle, the Spirit kicks the muffler/exhaust out to the driver's side at an angle.

Other than that, they're the same.

TurbododgePirate
09-25-2007, 11:08 AM
Sweet,

Yeah I know that they make a Spirit exhaust as well, but I have access to a Daytona exhaust more easily. Thanks!!~~H