Wiring diagrams needed

[mpgmike]

I'm adapting an '88 Shadow ES 2.2 Turbo wiring harness & SMEC to my '84 carb'd Charger. I need the ECU pin-out for the Shadow and Charger, and firewall bulkhead pinout for the Charger. I checked around but can't seem to find them on the net.

Thanks in advance,
Mike

[SwiftTech]

here is a link a scan of the 40 way bulkhead connector on the Rampage
http://www.turbo-mopar.com/forums/showthread.php?p=116649#post116649

I have the entire 84 service manual so if you need others scanned let me know. From the looks of it the charger doesn't have a logic module, did you need the wiring diagram for the Electronic spark advance ignition system?

[SwiftTech]

Here is a scan of the electronic spark controller diagram and of the table of contents for all the diagrams, if you need another one scanned.

[mpgmike]

Awesome! Thanks very much. I still need to know what the wires coming out of the '88 SMEC are so I can splice a few into the '84 bulkhead. At least now I know where they go.

Mike

[zin]

Follow the link listed here: http://www.turbo-mopar.com/forums/showthread.php?t=8336
If you don't find what you need, just email the guy, he was a real help to me, emailed me some diagrams that weren't listed on the sight, I'm sure if you can't find it there, he'd be willing to help you out too!

Mike

[mpgmike]

With all your help I have the harness modified so that only the things that the SMEC ties into, and the functions I will be keeping (no AC or CC) are still in the harness. I'll tape in the light wiring etc when I get it into the car. Thanks all.

Mike

[SwiftTech]

Glad I could help:thumb: