PDA

View Full Version : i think i found new GLHS radiators!!



roachjuice
09-23-2007, 04:10 AM
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=PCE&MfrPartNumber=433882&PartType=31&PTSet=A

supercrackerbox
09-23-2007, 04:57 AM
That looks like one that they mistakenly ordered for me for my car a couple years ago. I don't even know what the intended application was supposed to be, but they had it listed as "extra cooling". I don't see how, since the core was shorter, narrower, and thinner than a standard turbo L radiator, but it definately wasn't a GLHS radiator.

roachjuice
09-23-2007, 06:29 AM
i will have my local store order one and i'll take a look at it. i'm not paying 300 dollars for a used one. lol

mw6886
09-23-2007, 12:08 PM
Thats and old school Omni radiator. I think its even aluminum. Probably for a 1.7?

johnl
09-23-2007, 12:33 PM
Likely a t1 rad; don't know, specs according to them are:

Dimensions: 17 1/4" x 12 1/2" x 1 1/4"
Rows: 2
Tank Inlet: 1 7/8" x 12 3/4"
Tank Outlet: 1 7/8" x 12 3/4"
Hose Inlet: 1 1/4"; Top Right
Hose Outlet: 1 1/4"; Bottom Right
TOC:
EOC:
Construction: Plastic Tank Copper Brass Core
Comments: Heater Return Line on RH Tank; Sensor Fitting with Plug on LH Tank

"Top Fuel" Bender
09-23-2007, 08:57 PM
Likely a t1 rad; don't know, specs according to them are:

Dimensions: 17 1/4" x 12 1/2" x 1 1/4"
Rows: 2
Tank Inlet: 1 7/8" x 12 3/4"
Tank Outlet: 1 7/8" x 12 3/4"
Hose Inlet: 1 1/4"; Top Right
Hose Outlet: 1 1/4"; Bottom Right
TOC:
EOC:
Construction: Plastic Tank Copper Brass Core
Comments: Heater Return Line on RH Tank; Sensor Fitting with Plug on LH Tank

this one pictured is a stick '89 or '90 tbi omni
It's got the pass. outlet midway up the tank
there's 2" on the bottom not even used
alumn. core and plastic endtanks
very compact design but way different then any other td or non-td

roachjuice
09-25-2007, 05:15 PM
so is it skinnier than the glht radiator??? if so i'll use it.

Marcus86GLHS
09-25-2007, 07:45 PM
keep in mind the heater hose nipple is on the wrong side for your glhs, it needs to be on the drivers side, this rad has it on the pass. side.

supercrackerbox
09-26-2007, 06:30 PM
I seem to remember it being the same width, but I could be wrong.