PDA

View Full Version : Parts fs



pooky
02-09-2006, 09:25 PM
2- 1 pc. TII intakes. One complete, one with rail, reg., inj. $40 and $30 respectively.
2.5 crank, excellent shape-$30
Mitsu turbo, works great and no smoke-$25
TI Garrett. Absolutely no shaft play and non smoker-$75
Set of TII rods bored for .927 pin Venolias, excellent shape, no bushings-$75
Intermediate shaft, excellent shape(oil pump drive shaft)-$30
Pre CB cast cranks. 2.2. Have 2. Both in good shape-$30 each.
Bathtub head, '85 casting. Excellent shape, no valvetrain. Can throw in a '88 turbo roller cam and lifters-$75
A-555 for parts. Lost 3rd gear, disassembled and found bad synchros. Everything else is good. This trans was not run for more than 5 minutes after losing 3rd. Rebuild or great parts-$100
43,000 mile A-413. Didn't slip or make noise. Came from an '88 turbo Daytona. Good trans. $60
All prices do not include shipping. All parts located in MT.

87glhs232
02-09-2006, 10:08 PM
ummm....forgeting something?

turbovanmanČ
02-09-2006, 10:43 PM
^^^Ok Kramer, :lol:

Pooky, please list your location-either in the thread or top right, thanks.

pooky
02-10-2006, 08:31 PM
Also have a billet T-stat housing. Anodized red from fwd. $30 shipped.