1FastCSX289
09-11-2007, 09:07 PM
Im looking to put some $$ together for some more mods. Is anyone interested in anything? Help a poor guy trying to go fast! Will be shipped from 14580 to get an idea on cost.
1. Nicely ported one piece intake. This was originally on my CSX before I switched to a custom intake. I ran 12.60's at 18-20 PSI with this intake - $85. OPened up for a 52mm TB and runners ported very nicely. Will throw in the TB for $15.
2. 2.5L Turbo shortblock - $125. Was supposedly running when pulled. Needs to be checked over, cleaned up and new gaskets installed. Oil pan has been off to remove the balance shafts. P/U only unless you REALLY want to pay for freight.
3. 782 Turbo head - unknown condition- a bit dirty, but doesnt have any obvious cracks or problems. If it turns out to be junk, ill give you your money back minus shipping. $40
4. G-head from an N/A application. Came off of running car. You'll probably want to replace the exhaust valves with turbo valves. Nice start for porting. $75
5. Set of four Pizza rims. A little corroded, but could be cleaned up. No major damage. $95
6. 52mm Throttle body. Works fine. No sensors or cable bracket. $25
7. Brand New MOPAR 2.5L oil pan. Still has the stickers on it. $30
8. T1 intakes, starters, power steering pumps, misc brackets, and all kinds of piddly crap. PM me with your needs and I will see what i have.
I can send pics if you drop me an email addy.
1. Nicely ported one piece intake. This was originally on my CSX before I switched to a custom intake. I ran 12.60's at 18-20 PSI with this intake - $85. OPened up for a 52mm TB and runners ported very nicely. Will throw in the TB for $15.
2. 2.5L Turbo shortblock - $125. Was supposedly running when pulled. Needs to be checked over, cleaned up and new gaskets installed. Oil pan has been off to remove the balance shafts. P/U only unless you REALLY want to pay for freight.
3. 782 Turbo head - unknown condition- a bit dirty, but doesnt have any obvious cracks or problems. If it turns out to be junk, ill give you your money back minus shipping. $40
4. G-head from an N/A application. Came off of running car. You'll probably want to replace the exhaust valves with turbo valves. Nice start for porting. $75
5. Set of four Pizza rims. A little corroded, but could be cleaned up. No major damage. $95
6. 52mm Throttle body. Works fine. No sensors or cable bracket. $25
7. Brand New MOPAR 2.5L oil pan. Still has the stickers on it. $30
8. T1 intakes, starters, power steering pumps, misc brackets, and all kinds of piddly crap. PM me with your needs and I will see what i have.
I can send pics if you drop me an email addy.