PDA

View Full Version : indy intake applicatons



spoolinhard
08-06-2007, 05:23 PM
will an indy intake work for an 04 2.4 head, or are the ports radically different?

BadAssPerformance
08-06-2007, 05:26 PM
I believe 2.0L to 2.4L the ports are the same on the intake side.

boneyardracing
08-06-2007, 05:32 PM
Heads are the same unless you are talking SRT.

Speedeuphoria
08-06-2007, 06:04 PM
2.0 2.4 ports are the same, but 95-99 is different than 00+
So if you an Indy for a 00+ it should fit.

BTW the 1st gen Indy is not a bolt on to a 2.4 its a pain and needs mods to fit, people even complain about them on 2.0's

spoolinhard
08-07-2007, 10:59 AM
2.0 2.4 ports are the same, but 95-99 is different than 00+
So if you an Indy for a 00+ it should fit.

BTW the 1st gen Indy is not a bolt on to a 2.4 its a pain and needs mods to fit, people even complain about them on 2.0's

ive been hearing this alot. WOuld there be more or less mods for an 00+?

what do you have to do?
thanks
-kaleb

Speedeuphoria
08-07-2007, 12:05 PM
have to grind on it and the alt bracket, mod/tweak the dipstick, grind out where the attaching bolts go so you can actually get a wrench on it to tighten, ect.. Oh also smash in the cover of the alt so it doesnt touch the intake, get the shortest belt because you only have like 1" of play where it doesnt touch w/ all of the above mods.

I have no Idea on the newer ones

spoolinhard
08-07-2007, 01:05 PM
ports and bolt up the same on a new head?