PDA

View Full Version : I need a picture of this piece?



TurboII
08-04-2007, 01:35 AM
Any body have a picture of the exhaust piece that goes around the rear axle i need that piece to give to my exhaust man so he can duplicate it into a 3"

88 lebaron 2 door

moparfwdsleeper
08-04-2007, 01:45 AM
why cant it do it with the car.. makes for better fitment im sure and the pics wont tell him where to bend, how much of a bend, etc. sounds odd to me, id find me a new exhaust shop

TurboII
08-04-2007, 05:00 PM
I have a side exhaust and it will be kinda hard to tell were the bends go but with a picture the exhaust guy can have an idea.

moparfwdsleeper
08-04-2007, 05:41 PM
lol that is funny to me:p

Take a look under your car, the path for the piping is made.

cordes
08-04-2007, 11:19 PM
He must be very skilled to make a piece that needs multiple bends in many different planes while having to fit in such a tight spot from just a photo.

2.216VTurbo
08-04-2007, 11:24 PM
Did HE really ask for a pic or are you just hoping it helps him? If he DID ask, find a new exhaust guy:confused:

iangoround
08-04-2007, 11:48 PM
I wonder if you could just order that part from TU? Might save you some hassle.

TurboII
08-05-2007, 03:24 PM
I wonder if you could just order that part from TU? Might save you some hassle.

Know i tryed TU But chris said its a kit. And when i called my exhaust guy i told him i'll give you a picture he didnt ask for it i told him it will give an idea.

moparfwdsleeper
08-05-2007, 04:03 PM
The pic is worthless. Just stop by his shop and let him do his job. He will get it close to OEM im sure.

Gearhead24-7
08-05-2007, 06:52 PM
Any body have a picture of the exhaust piece that goes around the rear axle i need that piece to give to my exhaust man so he can duplicate it into a 3"

88 lebaron 2 door

43130 is the NAPA part number for the J body over axle pipe, if there's one near ya pick it up as a template. 3" is a very tight fit on a J body. I have the G bodyFM stainless sytem on mine, but I still had to fabricate the axle pipe to make it fit....and it still rubs the coil spring on a hard bump.

TurboII
08-06-2007, 12:56 AM
LMAO why didnt i think of that i work at napa.

moparfwdsleeper
08-06-2007, 01:31 AM
:lol: How many of us would have also let that one get by us? I would have i'm pretty sure of it:p

Gearhead24-7
08-06-2007, 07:53 PM
LMAO why didnt i think of that i work at napa.

Me too, a little over 9 years on the counter...that's how I knew the part number off the top of my head.

Don't ya just hate it when ya miss the easy ones? lol.