air to water intercooler?

[jkupp2000]

anyone have a air to water intercooler on there car?

["Top Fuel" Bender]

anyone have a air to water intercooler on there car?

yeap had

[jkupp2000]

got any pics?

["Top Fuel" Bender]

short quetion so I gave a short answer
If you click on my homepage you'll see tons
It was for a strictly drag race application
large I/C with, lots of ice water with a circulation pump
Very effiecent at cooling the intake temps (so much the pipe to the throttle body would sweat cold water !!)
my setup was not good for street driven vehicles
I had problems with what I believe was leaking in the I/C at the factory epoxied joints
I would/am considering doing to again
The car would run very consistantly even in high heat

LMk what your doing an if you have any questions

[dds78910]

SMP has one on his car.

[jkupp2000]

http://img371.imageshack.us/img371/1989/watercoolerrightfe0.jpg

this is my set up on my daily driver i was using a 12 fuel pump but i just switched to 2200 gph and its great!

[jkupp2000]

http://img466.imageshack.us/img466/4533/watercoolerfa8.jpg

http://img466.imageshack.us/img466/2904/pumpvo6.jpg

[dds78910]

Looks like a nice setup!:thumb:

[WickedShelby88]

I'm impressed. Thats just what I need for my SC.

[ShadowFromHell]

do you have any pics of your heat exchangers? I bought one a while back for a car I was building (never finished) and could never decide on a heat exchanger.


mine
http://www.509dodgeboys.com/coppermine/albums/userpics/normal_427ic1.jpg

[cs daytona]

i was wanting the same w-a intercooler. i found this site www.frozenboost.com the $300 kit looks awesome!!

[ShadowFromHell]

wow... that kit is NICE! I wish I would have saw that before I bought mine, I paid over 200 just for the IC.

[Dusty_Duster]

That is a nice kit. Makes me wish I had gotten one of those instead of using an air-to-air intercooler.

[NeonShowCar]

I really like that water/air kit on that website, but did you also see this air-to-air intercooler? http://www.frozenboost.com/product_info.php?cPath=7&products_id=206&osCsid=207d066b8885672865b45b6ee0a3f9c6

Bar and Plate design, 23x20x3.5" with 2.5" in/out same side with a Pressure drop of 1psi. Up to 800 cfm for only $149.99...!!! What a smoking price!

[MiniMopar]

That is a good price. siliconeintakes.com (stamped on the image) is a great place for cheap silicone parts and other plumbing doodads.

[Turbodave]

Those do look like a decent kit for the money. This might work out well on my van where I'm looking to intercool it and keep the A/C up front.