PDA

View Full Version : What tools needed to pull motor



1badgvr4
07-30-2007, 05:36 PM
I have a clean turbo van at a yard close to me and i going to take everthing .Im new to turbo mopars so i need to know the tool need.Im going to cut all the wires and hoes.Stuff might be for sale and tell me what you need mabye i can pull it for you.Every thing is there almost.

overlordsshadow
07-30-2007, 05:51 PM
Well tell you what I use.
Saws all for the exhuast or 13mm wrenches
WD40 or some other lubricant
10,13,15,18, and 21 mm wrenchs, sockets, and such.
Pry bars, flat and star screw drivers

Are you just yanking the whole thing out as one piece, including trans?

cordes
07-30-2007, 06:34 PM
I would also include 8mm wrenches and sockets. I would not just cut up everything either. You could get decent cash for a complete good condition wiring harness, and it leaves it for the next guy who might need it.

1badgvr4
07-30-2007, 07:29 PM
Yea im going to pull it all together.Thanks for reminding me not to cut it up.Ive gone to the yard and found my parts all banged up so ill take my time