PDA

View Full Version : WTB Power sunroof for Lancer Shelby



turboking
02-04-2006, 11:15 PM
Finishing up my Shelby Lancer. Raised it to high on the lift:mad: I might as well put a power sunroof,if i am going to change the roof. Will travel have minivan Want the whole roof cut at pillars

Carl

midohiomoparsource
02-04-2006, 11:45 PM
I have one.
Out of 88 Lebaron GTS
The roof was cut, but not at pillars. It was cut along the top edge of the doors, and above the windshield and across the back.
It has been outside for awhile, but should still be good. It worked fine when pulled.
Includes everything attached to the roof, switch and as much wire and drain tube as I could get.

Located in Ohio.
Where you from?

Matt

turboking
02-05-2006, 03:54 PM
I am in Long Island New York. Got pictures?

So what we are saying is the roof that u have , once i weld it in place of mine. no body work is needed on the outside (just on the innner Part?)


Carl

midohiomoparsource
02-05-2006, 05:21 PM
I cut this as close to the edge as I could. There will be body work, that is for sure. It was a rough cut with a sawz all. I will take pictures next time I am at my parents where it is stored. Probably be there next Sunday.

Matt