LM to SMEC Converion L-Body

[SpoolinGLH]

Alright guys,... I have a '89 T2 harness that I want to put in my '85 GLH that is already converted to T2. Is there a step by step guide on how to do this? What does it involve??? Thanks

[Skibbe]

It involves changing the bulkhead connector on the '89 harness to accept the L body one. If soldering 30 or so wires doesn't scare you, do a search here or at TD.com and find the wiring pin outs for the two connectors so you can solder the wires to the correct pins in the L body plug.

[SpoolinGLH]

Thats it? Sounds pretty simple....

[SpoolinGLH]

heres what I got so far....
'89 T2 Daytona 50 way To '85 GLH 40 way
1 connects to ?
2 connects to Dont Need
3 connects to Dont Need
4 connects to Empty
5 connects to 39
6 connects to 5
7 connects to Dont Need
8 connects to 4
9 connects to Empty
10 connects to 36
11 connects to Empty
12 connects to Empty
13 connects to Empty
14 connects to Empty
15 connects to Empty
16 connects to Empty
17 connects to 17
18 connects to 18
19 connects to 27
20 connects to Empty
21 connects to 13
22 connects to 34
23 connects to 25
24 connects to 32
25 connects to Empty
26 connects to 24
27 connects to 7
28 connects to 8
29 connects to 33
30 connects to Dont Need
31 connects to ?
32 connects to 21
33 connects to 31
34 connects to 29
35 connects to 19
36 connects to 20
37 connects to Dont Need
38 connects to 10
39 connects to Dont Need
40 connects to Dont Need
41 connects to ?
42 connects to ?
43 connects to ?
44 connects to ?
45 connects to 15
46 connects to 16
47 connects to 38
48 connects to 35
49 connects to 40
50 connects to 14

[SpoolinGLH]

Can anyone help me??? I have to get this car back on the road...thanks...

[zin]

From what you've posted, it looks like you have the FSM wiring diagrams for both cars, so you should be able to just "connect the dots" (or wires in this case), just splice the wires that would normally pass through the firewall on the 89 harness into the firewall block/connector. You might want to get another firewall connector in order to steal a few of the terminated wires in case you need to add some wires to the block.

I've got a similar project I'll be doing soon, but I'll be using a 90 TI SBEC and a 90 Omni TBI harness. Should be even more fun than what you've got going on.:o Sorry I can't be of more help, good luck!!

Mike