forcedfedmopar
06-22-2007, 10:04 PM
car: 91 spirit r/t
spec; fresh rebuild, +.030, stage 1 fwd cams, T3/T4 hybryd, stage 1 FWD cal, stock injectors(stock fuel system to my knowledge), FMIC, and some other stuff im forgetting.
PROBLEM;
Well i recently rebuilt my engine/trans w/ a new turbo ect, ect, ect.... well i got it all back in and everything is great. starts up, runs, drives everything is peachy. UNTIL i go to stop. the car dies when coming to a stop. but it wont die when i pull it out of gear during a roll. doesnt matter what speed/gear. but when coming to a stop it dies. last time it did this was coming into my driveway and it wouldnt start back up. i had to hold the accel. pedal about half way and it started ran very rough until i reved it up, (i didnt notice any smoke but theres a cat, resinator, and a muffler, along with a few leaks.). once it starts up it seems like it runs fine.
What ive done;
replaced speed sensor (w/new) due to old one wacking out.
swapped iac and tps with good ones
checked codes- no codes.
What i think;
I think its loading up but not sure why. injector stuck open? fwd cal messed up? i dont have a fuel psi kit at home so im stuck with this until mon at the earliest.
WHAT DO YOU THINK?
i know you guys know these things in and out. please help me!?!
thank you in advance
-jeff
http://i45.photobucket.com/albums/f98/forcedfedmopar/100_1834.jpg
spec; fresh rebuild, +.030, stage 1 fwd cams, T3/T4 hybryd, stage 1 FWD cal, stock injectors(stock fuel system to my knowledge), FMIC, and some other stuff im forgetting.
PROBLEM;
Well i recently rebuilt my engine/trans w/ a new turbo ect, ect, ect.... well i got it all back in and everything is great. starts up, runs, drives everything is peachy. UNTIL i go to stop. the car dies when coming to a stop. but it wont die when i pull it out of gear during a roll. doesnt matter what speed/gear. but when coming to a stop it dies. last time it did this was coming into my driveway and it wouldnt start back up. i had to hold the accel. pedal about half way and it started ran very rough until i reved it up, (i didnt notice any smoke but theres a cat, resinator, and a muffler, along with a few leaks.). once it starts up it seems like it runs fine.
What ive done;
replaced speed sensor (w/new) due to old one wacking out.
swapped iac and tps with good ones
checked codes- no codes.
What i think;
I think its loading up but not sure why. injector stuck open? fwd cal messed up? i dont have a fuel psi kit at home so im stuck with this until mon at the earliest.
WHAT DO YOU THINK?
i know you guys know these things in and out. please help me!?!
thank you in advance
-jeff
http://i45.photobucket.com/albums/f98/forcedfedmopar/100_1834.jpg