PDA

View Full Version : What to use for sealing bedplate to the block?


TurbododgePirate
06-22-2007, 10:02 AM
Okay, my machine shop had a question I could not answer. What do you use to seal the girdle to the block on a 2.4? Just anareobic sealer? Anything special?

~~Heath
Speedeuphoria
06-22-2007, 01:47 PM
Okay, my machine shop had a question I could not answer. What do you use to seal the girdle to the block on a 2.4? Just anareobic sealer? Anything special?

~~Heath


yes anareobic sealer(I used Mopar), and use it for the oil pump to block also. Some use it on the rear main also, the FSM dosent seem to say anything so I did not and no leaks so far.

Did you pull the BS's and block the oil hole?
guyd_15
06-23-2007, 08:15 AM
Mopar anerobic sealant, I think Cindy has it for $15.

Guy
JDAWG
06-23-2007, 12:48 PM
An anerobic sealer cures in the absence of air. You can use the pink stuff but Mopar designed its own sealer specifically for bedplates only. Its green, pn. 4773257. Heath if you want some I can probably next day ground it to you. It is a little more though. I have the pink stuff too. LMK
WVRampage
06-23-2007, 03:55 PM
Use the mopar bedplate sealant,it is made for it.
Speedeuphoria
06-23-2007, 08:05 PM
I used mopar red/pink stuff w/ no probs
TurbododgePirate
06-25-2007, 08:51 AM
An anerobic sealer cures in the absence of air. You can use the pink stuff but Mopar designed its own sealer specifically for bedplates only. Its green, pn. 4773257. Heath if you want some I can probably next day ground it to you. It is a little more though. I have the pink stuff too. LMK

Yeah, that would be great, How much?


Heath farquhar
417 fayette city road
perryopolis pa 15473