Wanted: 3" ID cast Al elbow

[BadAssPerformance]

Wanted: 3" ID cast Al elbow

Most cast Al elbows are 3" OD, I need one that is 3" ID to put between the 75mm TB and intake plenum... lemme know if you know somewhere that sells them.

[Tony Hanna]

http://www.mcmaster.com/library/20051004/4672T180L.GIF

Closest thing I could find that wasn't smaller than 3"ID, but a bit pricey @ $56.54.

[BadAssPerformance]

Ouch, a little pricey is right... was looking for a little thicker tho.

[Turbodave]

There are 3.5" aluminum (not cast) elbows on ebay:
http://cgi.ebay.com/ebaymotors/3-5-90-Aluminum-Turbo-Intake-Pipe-Bends-Supercharger_W0QQcmdZViewItemQQcategoryZ33742QQihZ 007QQitemZ170124087879QQrdZ1QQsspagenameZWDVW

Not exactly what your looking for but they may work.

Otherwise is there something you could salvage for that part, maybe the outlet on a big intercooler, or some type of truck intake? Might be a less expensive route.

[Turbodave]

A few better ones for you:
http://cgi.ebay.com/ebaymotors/C-L-MUSTANG-ALUMINUM-INTAKE-ELBOW_W0QQcmdZViewItemQQcategoryZ38634QQihZ020QQit emZ300122279189QQrdZ1

http://cgi.ebay.com/ebaymotors/2001-DODGE-RAM-CUMMINS-DIESEL-TURBOCHARGER-INTAKE-ELBOW_W0QQcmdZViewItemQQcategoryZ33742QQihZ004QQit emZ140131257049QQrdZ1

http://cgi.ebay.com/ebaymotors/94-95-FORD-MUSTANG-INTAKE-ELBOW-COBRA-GT-40_W0QQcmdZViewItemQQcategoryZ36474QQihZ017QQitemZ 270135795742QQrdZ1

[BadAssPerformance]

Nice finds...

[Tony Hanna]

Here's another one from Mcmaster-Carr that's a little bit heavier (sched. 40 instead of 10)
http://www.mcmaster.com/library/5/552344/43485K127l.gif
Price is a little better too. $40.38

[BadAssPerformance]

PERFECT! :thumb:

Thank you!!!

[Tony Hanna]

You're welcome.:thumb:
They have that elbow in sched 80 as well, but it's over $100.:confused:

[BadAssPerformance]

Damn... well 40 should be good enough :thumb: