View Full Version : What voltage to injectors?
Anonymous_User
06-09-2007, 02:43 AM
What voltage are the injectors run at? If other than 12v is there some method of testing that the proper power is there? I doubt if my multimeter would pick it up being switched that fast.
MiniMopar
06-09-2007, 09:00 AM
They are supplied with 12V by the ASD relay. The other leg is grounded by the ECU. It's not just a simple grounding, though. They use an injector driver which performs a peak-and-hold. A lot of current is applied to move the pintle, but a lower current it applied to hold it open.
Anonymous_User
06-09-2007, 08:37 PM
OK, so I can check to be sure there is 12volts at the injector, but the ground....
Are two injectors fired simultaneously?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.