They're back with a price drop! More L Body WHITE GAUGES!!!!!!!!!

[smdandb2]

I have had TONS of PMs about these, I just couldnt pass it up. Sorry for the lack of replies to the PMs, but I bought a new toy (cough07YamahaR6cough) and the weather has been FANTASTIC (not to mention I reloaded my computer and I am still getting Vista setup right)!

So here we go again.

I have 20 sets of the MPH gauges, and about the same of the KMH gauges.

Price:
$35 Shipped in the USA
$40 Shipped to Canada

This time round though, I only can accept PayPal. So if you don't have PayPal, get a prepaid Visa from 7-11 or something and set one up baby! It's about 1000x easier on all parties involved just to do it this way.

What you do is send the money to jdre1134@comcast.net, and I send them. It's that simple. I try to wait until there are a few orders before I pull out all my shipping supplies, but if I am sitting on your order for a few days and no one else buys, I will just buck up and send them.

Thank you fine people of turbo-mopar.com .

--Justin

C/N...

Send $$$$ to jdre1134@comcast.net and get white gauges for your L Body.

http://img368.imageshack.us/img368/974/crw6965smdk9.jpg

http://img260.imageshack.us/img260/972/dscn9633ow9.jpg

[Jehoram]

Are these stickers or temporary, I would like to be able to remove them easily for car shows (go back to stock) will get if they are removable

[smdandb2]

They are vinyl plastic stickers. Once you have them on, they aren't coming off without direct heat. They come off pretty easy though, but you can not reuse them.

Thanks.

[Alberta_Daytona]

so these are for the actual guage...or the sticker?

[Boltthrower]

its overlays that go over your original gauges.

[smdandb2]

its overlays that go over your original gauges.

Thank you!

[Mopar_Nutz]

Are these stickers or temporary, I would like to be able to remove them easily for car shows (go back to stock) will get if they are removable

I don't see why you couldn't replace the rivets with bolts/screws and then grab another cluster just for it's faces. Then you could swap the black face with white face at your leisure. Removing and installing the needles would be the only real hazard.

[smdandb2]

Thank you everyone that has paid.

Your items shipped this morning.

THANKS!!!!!

[smdandb2]

Just bumping this again.

I still have about 10 sets of MPH and 10 sets of KMH.

[Tony Lane]

Can we see some night shots?

[smdandb2]

The car I originally did them for is still tore apart, so I can't get any night shots. Maybe someone who has installed them can.

[88_pacifica]

Are you ever going to have any for the G-bodies?

[SL#189]

Can we see some night shots?

Let me see if I can swing some night shots for ya :thumb:

[SL#189]

Here ya go - night shot with the White-face overlays. Pay no attention to the lazy tach... (Nothing to do with the overlays)

http://img.photobucket.com/albums/v481/Juanmarteen/07-29-07_2114.jpg

[Turbo Uno]

Do you still any MPH versions left over? Thanks :)

[Turbo Uno]

BUMP:bump2:

[scottsshelby]

BUMP:bump2:

yes i want the mph let me know if you have any left?

[minigts]

I have had TONS of PMs about these, I just couldnt pass it up. Sorry for the lack of replies to the PMs, but I bought a new toy (cough07YamahaR6cough) and the weather has been FANTASTIC (not to mention I reloaded my computer and I am still getting Vista setup right)!

So here we go again.

I have 20 sets of the MPH gauges, and about the same of the KMH gauges.

Price:
$35 Shipped in the USA
$40 Shipped to Canada

This time round though, I only can accept PayPal. So if you don't have PayPal, get a prepaid Visa from 7-11 or something and set one up baby! It's about 1000x easier on all parties involved just to do it this way.

What you do is send the money to jdre1134@comcast.net, and I send them. It's that simple. I try to wait until there are a few orders before I pull out all my shipping supplies, but if I am sitting on your order for a few days and no one else buys, I will just buck up and send them.

Thank you fine people of turbo-mopar.com .

--Justin

C/N...

Send $$$$ to jdre1134@comcast.net and get white gauges for your L Body.

http://img368.imageshack.us/img368/974/crw6965smdk9.jpg

http://img260.imageshack.us/img260/972/dscn9633ow9.jpg

Can I pose a suggestion or recommendation? With the issue of the MPH's wrapping around again and running over the lower MPH numbers and the trip odometer, would it be possible or look ok to start the lower numbers either smaller or inside and then spiral the numbers around? So when they come back around the 5 MPH mark they are kinda more in line. Or possibly print the numbers for the higher MPH in a smaller font? Or push the number closer to the edge of the gauge, which would give possibly a little more room and it would also put the numbers closer to the light. ;)

I'm just asking, not in any way commenting on the job, because when I saw this I was like, "I want these", but with the overlapping on the numbers and the ability to make your own overlays, I thought why couldn't it be done?

Anyways, just a thought/suggestion. OR would you be able to custom do one? How about that?

Kudos on the work though, very nice and the gauges look awesome with the white lights.

[minigts]

One question though... how in the WORLD did you get the needles off?! I couldn't for my life figure out how to do that. I didn't try too long because I was afraid I would break them.

[smdandb2]

Can I pose a suggestion or recommendation? With the issue of the MPH's wrapping around again and running over the lower MPH numbers and the trip odometer, would it be possible or look ok to start the lower numbers either smaller or inside and then spiral the numbers around? So when they come back around the 5 MPH mark they are kinda more in line. Or possibly print the numbers for the higher MPH in a smaller font? Or push the number closer to the edge of the gauge, which would give possibly a little more room and it would also put the numbers closer to the light. ;)

I'm just asking, not in any way commenting on the job, because when I saw this I was like, "I want these", but with the overlapping on the numbers and the ability to make your own overlays, I thought why couldn't it be done?

Anyways, just a thought/suggestion. OR would you be able to custom do one? How about that?

Kudos on the work though, very nice and the gauges look awesome with the white lights.


Thanks for the suggestion.

I tried different methods before I settled on this one. I wanted to retain the stock look as much as I could. This was the only real way to do it. If I changed up the font sizes or shuffled them around, it looked funky.

I just wanted to wipe out the KMH markings and use their location to show what the MPH would be if the needle wrapped around there.

[smdandb2]

One question though... how in the WORLD did you get the needles off?! I couldn't for my life figure out how to do that. I didn't try too long because I was afraid I would break them.


Actually, you dont pull the needle off at all. The overlays will slide right over it.

[Turbo Uno]

Just in case........letting you know that I paypaled you a few days ago for the MPH set. Thanks:)

[DSP]

I know this is an old thread, but any chance you have any of these left? I would really like a set or two.
Dan

[Ubmbass]

I have talked to him and he was saying it wasn't worth his time to print more because of the limited amount of sets that sold last time. and how long it took to sell them. I will see him today and ask again but I wouldn't get my hopes up.

[DSP]

Well, I can't say that doesn't suck; they sure did look great. Thanks for letting me know though.

[3GLHSs]

2 sets wanted here.....come on guys. lets commit to enough for another run...

[WickedShelby88]

Heck I might buy a set just to have em. I never know when I might end up with another L.

[ikknown]

i wouldnt mind a set missed out last time.

[30 PSI SHADOW]

im still waiting..................


bill

[NeonShowCar]

Wow, I never seen this post...! I would love a set of those white faces for the Shelby, but seems this isn't going to happen as this message started back in 07'.

[Keito]

smdandb2
Mitsu booster
Last Activity: 03-13-2008 03:50 PM
OP hasent been on in a while.

[TheCanadian007]

Reviving an old thread here, was wondering if anyone had a set of these white gauge overlays, preferably in a km/h format. If not, anyone know who's capable of making them?


Thanks, TheCanadian

[TheCanadian007]

Bump Bump, anyone know?

[TheCanadian007]

Bump again, anyone?

[88_pacifica]

I don't believe that he makes them anymore. Maybe somebody on here still has a set they could sell you, but I am pretty sure those are no longer made... :(

[Ubmbass]

I have two clusters that have them installed,.. they were the "test fit" clusters. we weren't very gentle with them so we broke a couple needles in the process.. but The white gauges looks great. Let me see if I can get them out of the garage and take some pics.. if interested I would sell them for 50 bucks each +shipping if that's too much.. Then I guess I'll keep them lol

[WickedShelby88]

I'd like to know whats involved making them. I sure would like to make a white face for may lancer's cluster.