PDA

View Full Version : Making a 3 bolt flange to downpipe section.



Xtrempickup
05-20-2007, 03:41 PM
I went on Racing solutions and think i found what i need to make my standard T3 3 bolt flange t3/t4 turbo mate up to my stock 2.5 end on my 3in stainless steel downpipe. I found the 3 bolt flange in stainless or mild steel, a 90degree 2.5 pipe in either stainless or mild steel and a O2 bung in stainless or mild steel. I don't plan to make a standard exhaust donut type mating, just pipe over pipe with clamp, weld them together or piece of flex pipe between dp and the end of the 90 degree. basically create the 90degree section that a swingvavle on a standard Chrysler turbo would have. does this sound like all i need?

SwiftTech
05-25-2007, 02:55 PM
here is what I have for when I install my tbi header, Altered7151 made it up using 3" pipe. Sounds like you're planning something similar.
http://i22.photobucket.com/albums/b318/altered7151/IMG_0446.jpg

Xtrempickup
06-02-2007, 11:52 PM
yes thats what i have to do more or less