PDA

View Full Version : coolant temp sensors



TurboXT
01-29-2006, 06:10 PM
do they differ between the years or TI, TI 2.5 and TII?

lmk thanks

Frank
01-29-2006, 06:47 PM
This is something I never thought about. I dont have hard facts other then some deductable reasoning. We know that there are two coolant sensors - one for the computer and one for the gauge. Guages are switchable between years without any issues, people swap heads without any issues, people do logic module and ecu swaps without problems. So other then threading, etc, they are the same!?!


Frank

inmyshadow
01-29-2006, 07:12 PM
could you just cross reference the part number at some online parts store?

TurboXT
01-30-2006, 10:36 AM
yup. heres what i got.

TI pull thru SU304
TI blow thru SU303
TII SU303

turbovanmanČ
01-30-2006, 01:42 PM
I got all 85 and up fuel injected Dodges, 2.2 or 2.5 use the same computer coolant temp sensor. Carb and 84 and down use another number.

TurboXT
02-02-2006, 03:44 PM
well my two cars that have been converted to TII glhs electronics havent idled right on cold start ups since they were converted 2 years ago. so i put temp sensors from blow thru cars and now they idle fine every morning. the draw thru and blow thru sensors dont even look the same and use a different size wrench. so maybe they are different....

turbovanmanČ
02-02-2006, 05:18 PM
Production change. I have seen different sizes depending on year, brand etc but the thread is always the same.