Dez
05-08-2007, 12:14 AM
Hey guys, i recently installed my A/C in the baron. Started it up, ran a bit rough as i disconnected the battery and reset the computer. However, it stayed rich and did not change.
Rich and studders. Seems to lean miss at times, like at red lights and i go. Usually at around 3" vacuum, not sure on RPM as my tack is screwy.
What tables could i change to lean it out at idle?
I am running one of Shelgames cals, he suggested that my injectors my be flowing more than they are suppose to.
Might also be that i have a vacuum leak somewhere, which i will check probably tomorrow if possible.
let me know, thanks.
~Dez Williamz
Rich and studders. Seems to lean miss at times, like at red lights and i go. Usually at around 3" vacuum, not sure on RPM as my tack is screwy.
What tables could i change to lean it out at idle?
I am running one of Shelgames cals, he suggested that my injectors my be flowing more than they are suppose to.
Might also be that i have a vacuum leak somewhere, which i will check probably tomorrow if possible.
let me know, thanks.
~Dez Williamz