Running rich from A/C install.

[Dez]

Hey guys, i recently installed my A/C in the baron. Started it up, ran a bit rough as i disconnected the battery and reset the computer. However, it stayed rich and did not change.

Rich and studders. Seems to lean miss at times, like at red lights and i go. Usually at around 3" vacuum, not sure on RPM as my tack is screwy.

What tables could i change to lean it out at idle?

I am running one of Shelgames cals, he suggested that my injectors my be flowing more than they are suppose to.

Might also be that i have a vacuum leak somewhere, which i will check probably tomorrow if possible.

let me know, thanks.

~Dez Williamz

[Dez]

Found the vacuum leak, however, i am still running rich at idle. :/

Any ideas?

[bfarroo]

Did you reset the computer after fixing the vacuum leak?

[Dez]

Yes sir i did. Before i installed the A/C it worked fine.

[Dez]

Reset my cam and base timing. I was off not sure how many teeth. I gained 5" of vacuum and it idling good.

Tomorrow i will see if the cold start is better aswell.

Thanks..