PDA

View Full Version : pics of your non stock turbos


mark
05-04-2007, 01:12 PM
tIII peoples, I need some pics of your turbos, with the wastegate actuator arm and stuff... but I only need pictures of ONLY hybrid setups.

I have a hybrid and swapping out my jerry rigged WG can mount into a Z bracket, the can is spaced like 2 inches too far back, I had to fabricate something last night to make it work. I am just wondering if I did something wrong? I don't see how. I'm using a z bracket, and the stock tIII wg can with the adj arm.

tonight im going to finish up the adjustable arm I made (its only adjustable on a per single 360deg turn)

man, i appreciate having a welder and air tools. i love you wife!
turbovanmanČ
05-04-2007, 01:19 PM
I agree, I had to cut and weld up my wastegate arm to make it work. I also tried the Z bracket and no go. I would be interested to see how people have made it work.
RT16V
05-05-2007, 12:32 PM
Here's some pics of the hybrid on my R/T:

http://members.shaw.ca/rt16v/Aug_20_06 034_small.JPG
http://members.shaw.ca/rt16v/july 31 027_small.JPG
http://members.shaw.ca/rt16v/WG_bracket 002_small.JPG
http://members.shaw.ca/rt16v/WG_bracket 012_small.JPG

Blaine
mark
05-06-2007, 12:00 AM
great pics. question tho, is the wg arm perpendicular to the wg can? if its off at an angle will it affect the puck pulling process, geometry and physics guys think about this.
RT16V
05-06-2007, 02:50 AM
great pics. question tho, is the wg arm perpendicular to the wg can? if its off at an angle will it affect the puck pulling process, geometry and physics guys think about this.


Good Eye Mark. It is not quite perpendicular to the can, however it seems to be functioning well as there is some latitude when it comes to the extension & retraction of the arm from the can.
turbovanmanČ
05-07-2007, 07:14 PM
great pics. question tho, is the wg arm perpendicular to the wg can? if its off at an angle will it affect the puck pulling process, geometry and physics guys think about this.

Not at all, my arm was bent, angled, and it still worked great.
86Shelby
05-09-2007, 01:22 AM
http://www.turbo-mopar.com/forums/photopost/data/500/medium/z-bracket2.jpg

http://www.turbo-mopar.com/forums/photopost/data/500/medium/z-bracket1.jpg