View Full Version : Alternator help needed
TurbododgePirate
04-24-2007, 08:44 PM
Okay, I need to adapt a 1985 carbed GLH harness to use a 3 wire nippendenso alternator.
The GLH harness has 2 small wires that I assume correspond to the 2 small wires on the nippendenso... does their orientation make a difference??
The GLH harness has 1 large wire that corresponds to the large red wire on the nippendenso.
The GLH harness then has one more large wire. I have no idea where it goes or what it does. What can I do with it??
I am using a neon 3 wire nippendenso alternator if it makes any difference.
Your help is appreciated.
Heath
JDAWG
04-24-2007, 08:58 PM
what color are the 2 big wires?
TurbododgePirate
04-25-2007, 09:00 AM
I believe both are red. They're both real dirty... I'll try to get a pic up tonight.
JDAWG
04-25-2007, 10:44 AM
the 2 small should be feild wires, I beleive it doesnt matter which goes where, atleast that is what I have read, the 2 big wires has me curious, more than likley one goes to battery and the other goes up into the harness maybe to the fuse box or something, do you have a multimeter you can test them?
TurbododgePirate
04-25-2007, 10:55 AM
It's not on the car, so I have no idea.
JDAWG
04-25-2007, 11:09 AM
hmm, got a wiring diagram?
SL#189
04-25-2007, 11:14 AM
The other large wire on the '85 GLH harness is a ground wire (at least on mine). Continuity/voltmeter test to be sure.
TurbododgePirate
04-25-2007, 11:17 AM
The other large wire on the '85 GLH harness is a ground wire (at least on mine). Continuity/voltmeter test to be sure.
AH, Thanks thats what I was thinking.
tryingbe
04-25-2007, 11:57 AM
I am using a neon 3 wire nippendenso alternator if it makes any difference.
Why not find a TD nippodenso alterantor? Everything will be plug and play.
TurbododgePirate
04-25-2007, 12:28 PM
Why not find a TD nippodenso alterantor? Everything will be plug and play.
I don't think it will fit into my neon alternator bracket on my 2.4 block. Maybe it will. I'll have to look.
JDAWG
04-25-2007, 12:37 PM
I looked at a parts diagram and it looks the same, but of course I cant tell dimensions
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.