PDA

View Full Version : What Crank can I use?


GLHNSLHT2
04-23-2007, 07:06 PM
Hi guys, thinking about going with a 2.5 tall block setup since I'm going with custom rods anyway. I'm going to run the 2.2 forged crank. But which one, the 87-88 or the 89+??
turbovanmanČ
04-23-2007, 07:52 PM
As far as I can recall, the 2.5 crank for the tall deck is the only one you can use, without modding the other cranks to fit. I could be wrong but I am sure thats what Allmotor keeps saying.
BadAssPerformance
04-23-2007, 07:56 PM
one of the 2.2L cranks fit... info might be in this thread

http://www.turbo-mopar.com/forums/showthread.php?t=10337

or this one

http://www.turbo-mopar.com/forums/showthread.php?t=2948
turbovanmanČ
04-23-2007, 08:23 PM
Hahha, nice JT, I don't even remember my own thread. So to answer, 89+
BadAssPerformance
04-23-2007, 08:27 PM
LOL, that was my guess but I thought I'd just post your threads instead :D
GLHNSLHT2
04-23-2007, 10:14 PM
so it looks like that CB Forged crank I have will bolt right in. Thanks guys.
2.216VTurbo
04-24-2007, 12:40 PM
so it looks like that CB Forged crank I have will bolt right in. Thanks guys.

Yeah but will that square drive pulley you need bolt to the CB cranks? Was your donor for the 16V stuff a CB?
turbovanmanČ
04-24-2007, 01:22 PM
Yeah but will that square drive pulley you need bolt to the CB cranks? Was your donor for the 16V stuff a CB?

Does the Masi head use a square tooth timing belt?
2.216VTurbo
04-24-2007, 04:37 PM
Does the Masi head use a square tooth timing belt?

Um-huh:)
GLHNSLHT2
04-24-2007, 09:21 PM
Yep my 16v setup is CB baby! :partywoot: