PDA

View Full Version : External voltage regulator


1FastCSX289
04-12-2007, 03:56 PM
My car is equipped with an external voltage regulator for the SDS. When I pulled the motor out, I took the wires out of the external voltage regulator. Now, I am going back together. Im pretty sure I remembered this correctly but I wanted to make sure. There are two wires coming from the voltage regulator. They go to the dark blue and dark green field coil wires coming from the alternator, right?
GLHS592
04-12-2007, 08:38 PM
That sounds about right.
1FastCSX289
04-12-2007, 09:22 PM
That sounds about right.

Good! I guess i'll know for sure tomorrow when I go to start it.
GLHS592
04-12-2007, 10:10 PM
If it isn't charging the battery, swap the wires.
Speedeuphoria
04-13-2007, 11:22 AM
the blue one is on the top middle of the plug/pigtail(pretty sure). This one needs to also have a splice off of it that goes to a key switched +12v.

then greeen to the other field
1FastCSX289
04-13-2007, 01:23 PM
the blue one is on the top middle of the plug/pigtail(pretty sure). This one needs to also have a splice off of it that goes to a key switched +12v.

then greeen to the other field


Got it. Its charging!