PDA

View Full Version : New Product- FuelPressure Regulator Adapters



Chris W
04-07-2007, 08:59 PM
Are you looking to upgrade to an aftermarket fuel rail, but, don't want to have to re-invest in a universal fuel pressure regulator because you already bought a rail mount version? Through the combined efforts of TU and our new partner Powrehaus we are now offering fuel pressure regulator adapters which allow the use of your stock or aftermarket rail mounted FPRs with any aftermarket fuel rails. Our adapters allow you to choose which regulator you want to use. Simply screw the adapter on to the fitting on the end of the rail then bolt your stock or aftermarket AFPR to the adapter. Nothing to remove and no holes to plug. It takes less then a minute to install. Works with any aftermarket fuel rail when the proper fitting is purchased. Will fit one piece and two piece manifold rails as well as our TIII aftermarket fuel rails. Works with both factory and our aftermarket rail mounted regulators.

Introductory price is $20. This special won't last long and there will be no rainchecks for the introductory pricing.

We appreciate everyone's support!

Chris-TU

Mario
04-07-2007, 10:12 PM
Nice job Chris.

87glhs232
04-07-2007, 10:48 PM
I had the opportunity to look at one last Thursday. Very cool product. Something I would have bought if I hadn't already purchased a rail and regulator set up.

:thumb: Nice stuff Chris.

Frank
04-08-2007, 08:49 AM
That is clever!

8valves
04-08-2007, 09:18 AM
Very cool idea.

turbovanmanČ
04-08-2007, 11:27 PM
Thats awesome Chris, saves you making 2 fuel rails for each engine, :thumb:

Austrian Dodge
04-09-2007, 12:22 PM
yep...i need one ;)

cordes
04-09-2007, 12:51 PM
Excellent work Chris. That is a very cool product at a very good price.

WVRampage
06-05-2007, 09:56 PM
What kind of fitting is used,as I have a aftermarket rail I got for free and would like to see if it will work.The rail is 3/8 NPT

Chris W
06-06-2007, 02:28 AM
What kind of fitting is used,as I have a aftermarket rail I got for free and would like to see if it will work.The rail is 3/8 NPT

A male-male 3/8" npt fitting is all that's needed to mount the adaptor to the rail. It takes less then a minute to install.

Chris-TU

WVRampage
06-06-2007, 10:07 PM
ill pick one up at calisle or sdac...

contraption22
06-11-2007, 09:58 AM
Hey Chris, will you also be carrying the fitting that screws into the return side of the regulator to convert it to AN fittings?