How many computers and where?? help!!

[covrace]

hey gang

I gotta tell you, you've been very helpful. so here's another question.

1991 Dodge Daytona Shelby, 2.5 T-1 5 speed.
How many computers does this have and where are they. I know of one in the front fender that air passes through and i know that some had a computer in the passenger kick panel.

fwdperformance has a set of computers to up boost, remap sensors, kick on the fan earlier, etc but these computers clearly go in the fender. I thought the mopar performance computers did all that "souping up" but were a silver metal box with a plastic cover over the map sensor and a vaccuum line going to it. And that vaccuum line is where out put a granger valve correct. I'm so confused but want to learn. and not blow it up.

thanks again.

covrace@aol.com

Jake
Coviello Racing

[TurboGLH]

I was gonna type out a long post with all the info, but instead

http://www.turbo-mopar.com/forums/vbarticles.php?do=article&articleid=24

http://www.turbo-mopar.com/forums/vbarticles.php?do=article&articleid=25

http://www.turbo-mopar.com/forums/vbarticles.php?do=article&articleid=26

Always check the Knowledge Center first, it will most likely have the answer to your question.

[JDAWG]

yea man good lookin chris, not trying to be an --- here but you have alot to learn, up to 87 have a logic module in the kick and a power module under the hood, 88-89 had a smec under the hood, 90up had a sbec under the hood, 91 had a sbec under the hood and a bcm (body control module) in the kick