PDA

View Full Version : Alky safe fuel pump?



jre97
01-24-2006, 07:18 PM
Anyone know where I can get a good alky safe pump for under $200? I need one that will put out at least 85 psi unrestricted. I was using a stock pump from a 79 280z due to it's versatility but it tends to go bad if unused for a while.

cordes
01-24-2006, 07:33 PM
YOu might want to check the yard for a FFV. I am hoping to find one to pilage locally.

jre97
01-24-2006, 07:52 PM
I had thought about that but I'd rather run a new pump since my engine is at stake. I might check the parts stores and see what one runs. Do you know of one that could easily be converted to an inline setup?

mech1nxh
02-13-2006, 09:04 AM
YOu might want to check the yard for a FFV. I am hoping to find one to pilage locally.

besides mopar....
91-93 taurus (ford) look for the same little ffv green road emblem on the fender
85 gph bosch unit, all stainless supply and return tubes, teflon /nitrile? seal
on all electrical comnnectors....and in tank!
480

481

cordes
02-13-2006, 09:06 AM
besides mopar....
91-93 taurus (ford) look for the same little ffv green road emblem on the fender
85 gph bosch unit, all stainless supply and return tubes, teflon /nitrile? seal
on all electrical comnnectors....and in tank!
480

481


Thanks for the pic. Is that pump the same dia as the TM pumps?

mech1nxh
02-13-2006, 09:17 AM
Thanks for the pic. Is that pump the same dia as the TM pumps?
nope ....1" longer and 3/4" larger diameter..however I snaged that one
because the pump itself is not brazed to the outlet /return lines...
I am going to use it in the tona hybrid...should be an easy convert to
the "g" fuel tank flange...well I hope ..lol

jre97
02-22-2006, 11:14 PM
I think after looking at the prices on devils own online the shurflo is probably the way to go for my application.