'89 and up underdrive pulley (with no A/C)

[85shelbycharger]

Anybody know where I can get an a/c delete underdrive pulley for an '89 2.2 T2 common block? Or am I going to have to settle for a UP with the groove for the a/c belt? Thanks.

[slasky]

I have only seen them with the AC. Don't forget you have to grind away the lip on the crank seal retainer or your engine will not spin. Don't ask me how I know this.:)

[GLHS592]

You could always put one in a lathe and cut the outer A/C ring off.

[shelby zed]

i asked about one before but didnt get any results

[85shelbycharger]

I have only seen them with the AC. Don't forget you have to grind away the lip on the crank seal retainer or your engine will not spin. Don't ask me how I know this.:)

How do you know this? :p

[85shelbycharger]

You could always put one in a lathe and cut the outer A/C ring off.

I've thought about it, but by cutting that outter portion off, won't that affect the balance of the pulley? I think I read something like that before :p

[Anonymous_User]

I don't have a UDP, but I took my regular pulley to the lathe and removed the A/C part. If it's done in a lathe, there should be no balance issues. Might have some if you just used a hand grinder.