what is next?

[mark]

looking for suggestions on what is the next step for my r/t.

currently has:
fwp stage 3 cal (being replaced with a trim cal)
+40's
AFPR
3bar map
2.5" ic piping
2.5 full exhaust
50 trim t3/t4 'E' stageII wheel w/.48 turbine housing (.63 on its way)
konis, eibachs
spearco 1080 clone
narrow band a/f guage (being replaced with a WB)
boost gauge
egt gauge

just wondering what would be the next step i should have in thought.


thanks

[Lotashelbys]

-Titanium retainers would be a good thing,not only for performance but for valvetrain life expectancy.
-Lonewolf S1 cams would do nicely(Wallace says about 50 HP)
-FWD adjustable cam sprockets
-large plentum intake
BTW:what are you running for a HG? Cometic and studs I hope right???

[D1A8J]

mark ...

ever run ur car ??? (if so what did it run / put down)
im pretty much planning on running the same set up !!!

- Dave

[mark]

well...

lets say it was my first time at the drag strip with a manual car...
2.8sec 60'
had a problem shifting into 4th (arm quicker than left foot) and had to fiddle with it for like 1-2 seconds because i did it twice each run jamming it into 4th
trapped 97mph at like 14.9

it might be a solid 13 second car easilly if driven correctly. my gtp's best is like 14.2 and this car feels much faster than my gtp.

I only made 2 track runs, and both results were similar. bad launch, dork shifts into 4th... after that I just parked it and went and watched the races.

after i get the trimcal and the .63 housing on, There is a dyno like 2 miles from my house i am going to. I'm not expecting much.

[D1A8J]

awesome !!!

any pics of ur ride ???

- Dave

(how much boost are u running ??? im guessing 18psi)

[mark]

here are some pics. they arent the latest and greatest images of it, they are the only ones i have since the pics i redid all the vacum lines, im in the middle redoing the charge pipes, and other misc stuff.

http://tdh.2y.net/shelby/rt/

[D1A8J]

yeah ive been telling myself for almost 2 months that im gonna get around to redoing my vac lines, but never got to em !!!

looks good !!!

- Dave