Needed cables for OTC 4000e

[guyd_15]

Need the cables to connect my OTC 4000e to the diagnostic connector (would prefer the long cable) also need the cable that connects the scanner to a laptop.
Thanks,
Guy Douglas

[Diabloed]

http://members.nuvox.net/~on.hallwl/

Here's allot of info you'll want!

[csxtra]

http://members.nuvox.net/~on.hallwl/

Here's allot of info you'll want!

Actually, I changed ISPs, and had to move the site. The new link is:
http://home.fuse.net/csxtra/

The old one is still up until sometime next week.

Warren

[guyd_15]

Thanks, Warren
Guy Douglas

[Dez]

So for the switchcraft ta4fl, are those the only wires that are needed?

The three wires and that's it?

I'm just going to solder my wires to the scanner.

[csxtra]

So for the switchcraft ta4fl, are those the only wires that are needed?

The three wires and that's it?

I'm just going to solder my wires to the scanner.

Yep, signal ground, Send +, and Receive +. If you are using cable with a shield it wouldn't hurt to tie the shield to the ground connected to the outer shell of the connector, to keep noise out of the signal.

[Dez]

Sweet, thanks.

Cable finished and soldered :)

Thanks