Axle Stubs

[shelbymopar89]

I just need the ends that go through the wheel bearings. Car is an 89 Daytona Shelby. I am NOT looking for the complete axel. Just need dummie ends so I can roll the car. Thanks

[turbovanman²]

I'll see if I can get some from my axle guy. All my spare axles are too good to ruin.

I have 2 spare I use for that exact purpose, :thumb:

[shelbymopar89]

I'll see if I can get some from my axle guy. All my spare axles are too good to ruin.

I have 2 spare I use for that exact purpose, :thumb:

I think I might have a guy hooking me up. As long as that pans out I will be good, I will keep the post updated. Thanks
Brent

[86Shelby]

You might be able to find a long and large bolt with large washers to do the same thing. I remember several cars at tech school that used large bolts for that purpose.

[turbovanman²]

You might be able to find a long and large bolt with large washers to do the same thing. I remember several cars at tech school that used large bolts for that purpose.

That works, I just like using the old axles, :nod:

[sparkybuoy]

I have the ends you're loking for.

Steve
sparkybuoy@earthlink.net

[shelbymopar89]

I'll see if I can get some from my axle guy. All my spare axles are too good to ruin.

I have 2 spare I use for that exact purpose, :thumb:

See what he/you would want for two shipped to 04345 please.

[turbovanman²]

See what he/you would want for two shipped to 04345 please.

Ok, will do.

[shelbymopar89]

Ok, will do.

Any luck?