URGENT: 88 Lebaron Turbo 1 Parts Needed

[MopàrBCN]

Hi, I urgently need the following parts to finally restore my 1988 Turbo 1 Lebaron:

1. Underhood Wiring Harness (komplete with connectors)
2. Wastegate Solenoid
3. Alternator Conector (stock Chrysler 90amp Alternator)
4. Cruise Control Sensor
5. Pins for 60 Way Connector (ideally a complete 60 Way Connector for other project I have in mind)
6. 14 Way Connector (to connect to Powermodule in SMEC for other project I have in mind)

Items need to be shipped to Spain. Payment preferably by PayPal!

On the wiring harness I would accept as well a Turbo II harness as long as it is from a Lebaron 88/89.

:amen:

[midohiomoparsource]

I have an engine harness I think. Would be from an 89 TI Lebaron with 2.5 speed.
I will have to double check.

Matt

[MopàrBCN]

That would be great!!!! Please PM me if you can sell!

[MopàrBCN]

:bump2:

[jaysshelby]

I have an engine harness for an 89 Daytona Turbo 1 if interested. 50.00 plus shipping.

[MopàrBCN]

Hi, the Daytonaharness doesn't help me much because of the different Connector through the Firewall. Thanks!

[kwiksilver]

I was gonna say, it's gotta be a harness from an '88 car. I am in the process of swapping an '88 motor into an '89 lebaron. the '88 harness has a round connectors, the '89 harness has oval connectors. Unless you want to do a lot of cutting and splicing.... stick with the '88 harness.

[sparkybuoy]

I've got an 88 I'm parting out...email me with your wish list.

Steve
sparkybuoy@earthlink.net

[overlordsshadow]

When I did my engine swap I did the harness the hard way. Me and a couple buddies had souvlaki and mated 92 inner to a 88 outer.