View Full Version : Need help... need shock measurements...
Frank
01-18-2006, 09:28 AM
With the shock assembled with the screen, I need the length of the assembly -- from lower hub/spindle bolt to the upper mounting surface. I am mainly looking the difference in length. Just not if it is a stocker or lower spring installed and how much.
P-Body/Daytona:______________
1st Gen Neon:______________
2nd Gen Neon:______________
Thanks!
Frank
Frank
01-20-2006, 10:51 AM
Anyone???? :)
shadow88
01-20-2006, 10:30 PM
installed? or just sitting on the floor?
Frank
01-21-2006, 03:52 AM
sitting on the floor is prefered.
Garret
01-21-2006, 05:04 AM
http://www.3si.org/forum/attachment.php?attachmentid=56816
Like this frank? this was from a stock 87 Shelby Z strut with the stock spring
Garret
01-21-2006, 05:05 AM
If you need more specific measurements let me know I got the daytona strut downstairs
Frank
01-21-2006, 07:56 AM
I had to login to see it, but perfect!!! Now I just need this information for the first and second gen neon. However I dont need the bolt hole distances since they are the same as the daytona/shadow.
Frank
Garret
01-21-2006, 03:09 PM
No problem
fleckster
02-03-2006, 06:59 AM
Frank, are you still needing these measurements? I have a 1st Gen ('98 R/T) and a 3rd Gen ('03 SRT-4) Neons in addition to my K-car based old turbo Mopars. Let me know and I'll go out and take some dimensions for you.
Frank
02-03-2006, 08:03 AM
That would be awesome Fleckster...
I just need the 1st and 3rd Gen ones...
Thanks,
Frank
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.